ANSI Asme DIN935 Hex Slotted Castle Nuts

Carbon Steel Slotted Hex Castle Nuts
DIN935/DIN937/ANSI/ASEM B18.2.2 Standard
Size: M10 to M24 regular supply
ANSI B18.2.2 inch standard 3/8 to 1 inch in stock
More sizes available upon order
Class/Grade: 5, 8, 10
Surface: PL, ZP, YZP, BZP, HDG, bronze
Standard: DIN/ANSI/JIS/BS/IFI
Online catalogue and specifications hexnuts. Cn

1. Metric Sizes Regular Supply M4, M6, M8 up to M48
2. Other size M4 and below, or M48 and above MOQ required
3. As per DIN935 standard dimensions
4. Class 5, Class 8, Class 10
5. Standard or fine threaded
6. ANSI B18.2.2 Inch Size slotted hex nut
Grade 2, Grade 5, grade 8
UNC and UNF
7. Standard hex nut, hex jam nut,
8. DIN937 and more standard available
9. Surface Treatment Options:
Plain, Black, ZP, YZP, BZP, HDG,
Nickle, Chrome, Dacromet, Cr3+, Cr6+
Other Material Options for hex nut:
Stainless Steel SS201, SS301, SS304, SS316
Grade A2-70. A4-80


Hex slotted nut or castle nut is a hex nut with opposed slots cut into the top of the nut through the centers of the flats. The slots are on the end opposite the bearing surface. The slots are for the insertion of a cotter pin to secure the nut when used with a drilled shank fastener. Transhow offers metric coarse and fine pitch thread, UNC and UNF thread as per below standard dimensions.
DIN935-1 (-2/-3) Hexagon slotted nuts grade A, grade B, grade C, DIN937 Slotted hexagon nuts.
ASME/ANSI B18.2.4.3M Metric slotted hex nuts, JIS B1170 Slotted hexagon nuts, DIN797 thin castle nut.
ANSI/ASME B18.2.2 Hex Slotted Nuts, ASME/ANSI B18.2.2 Hex Thick Slotted Nuts, Heavy Hex Slotted Nut.
BS 3692 hexagon slotted and castle nuts style 1-product A and B.
Slotted hex nuts are normally made from carbon steel and alloy steel with grade 2, 5, 8. With a max hardness rockwell C32 and proof load 72, 000 psi. Surface treatment could be black oxide, zinc coating, hot dipper galvanizing, black zinc coating, brass coating, nickle and chrome plating, dacomate, etc. Please indicate this requirements with your inquiry. Carbon Steel Slotted Hex Castle Nuts
DIN935/DIN937/ANSI/ASEM B18.2.2 Standard
Size: M10 to M24 regular supply
ANSI B18.2.2 inch standard 3/8 to 1 inch in stock
More sizes available upon order
Class/Grade: 5, 8, 10
Surface: PL, ZP, YZP, BZP, HDG, bronze
Standard: DIN/ANSI/JIS/BS/IFI
Online catalogue and specifications hexnuts. Cn

1. Metric Sizes Regular Supply M4, M6, M8 up to M48
2. Other size M4 and below, or M48 and above MOQ required
3. As per DIN935 standard dimensions
4. Class 5, Class 8, Class 10
5. Standard or fine threaded
6. ANSI B18.2.2 Inch Size slotted hex nut
Grade 2, Grade 5, grade 8
UNC and UNF
7. Standard hex nut, hex jam nut,
8. DIN937 and more standard available
9. Surface Treatment Options:
Plain, Black, ZP, YZP, BZP, HDG,
Nickle, Chrome, Dacromet, Cr3+, Cr6+
Other Material Options for hex nut:
Stainless Steel SS201, SS301, SS304, SS316
Grade A2-70. A4-80


Hex slotted nut or castle nut is a hex nut with opposed slots cut into the top of the nut through the centers of the flats. The slots are on the end opposite the bearing surface. The slots are for the insertion of a cotter pin to secure the nut when used with a drilled shank fastener. Transhow offers metric coarse and fine pitch thread, UNC and UNF thread as per below standard dimensions.
DIN935-1 (-2/-3) Hexagon slotted nuts grade A, grade B, grade C, DIN937 Slotted hexagon nuts.
ASME/ANSI B18.2.4.3M Metric slotted hex nuts, JIS B1170 Slotted hexagon nuts, DIN797 thin castle nut.
ANSI/ASME B18.2.2 Hex Slotted Nuts, ASME/ANSI B18.2.2 Hex Thick Slotted Nuts, Heavy Hex Slotted Nut.
BS 3692 hexagon slotted and castle nuts style 1-product A and B.
Slotted hex nuts are normally made from carbon steel and alloy steel with grade 2, 5, 8. With a max hardness rockwell C32 and proof load 72, 000 psi. Surface treatment could be black oxide, zinc coating, hot dipper galvanizing, black zinc coating, brass coating, nickle and chrome plating, dacomate, etc. Please indicate this requirements with your inquiry.