Application and Structural Features of Clamp Check Valve

The check valve on the clip-type check valve installed in the pipeline system, its main role is to prevent media backflow, check valve is a medium pressure to rely on to open and close the automatic valve. The check valve on the folder for the nominal pressure PN1.0MPa ~ 42.0MPa, Class150 ~ 25000; nominal diameter DN15 ~ 1200mm, NPS1 / 2 ~ 48; Operating temperature -196 ~ 540 ℃ on the various pipelines, to prevent Media backwards. Through the selection of different materials, can be applied to water, steam, oil, nitric acid, acetic acid, strong oxidizing media and uric acid and other media. The main material on the wafer check valve: carbon steel, low temperature steel, duplex steel (F51 / F55), titanium alloy, aluminum bronze, INCONEL, SS304, SS304L, SS316, SS316L, Steel, Monel (400/500), 20 # alloy, Hastelloy and other metal materials. Clamp check valve standards and specifications 1, design and manufacture: API594, API6D, JB / T8937 2, the length of the structure: API594, API6D, DIN3202, JB / T8937 3, pressure, temperature class: ANSI B16.34, DIN2401 GB / T9124, HG20604, HG20625, SH3406, JB / T74 4. Test and Inspection: API598, JB / T9092 5. Piping flange: JB / T74-90, GB / T9112-9124, HG20592-20635, SH3406, ANSI B 16.5, DIN2543-2548, GB / T13402, API605, ASMEB16.47 Clamp check valve structure features 1, the structure of short length, the length of the structure only traditional flange check valve 1/4 ~ 1/8 2, Small size, light weight, the weight of only traditional flange check valve 1/4 ~ 1/20 3, the valve closed quickly, water hammer pressure is small 4, horizontal or vertical pipe can be used, easy to install 5, the flow Road, smooth, small fluid resistance 6, sensitive action, good sealing performance 7, the valve stroke is short, close the impact of small 8, the overall structure is simple and compact, handsome in appearance 9, long life, reliable performance

Steel Take Up Machine

The take-up machine,SG800 take-up machine adopts shaft-less type pneumatic to top,winding displacement use dia 50 polish rod strand oscillator,spool size by customer,step-less speed regulation.we can make the trunk take up machine,spool take up machine,the each motor is 11KW,

The first Safety precautions for LZ600 wire drawing machine+take up machine

1. 1 Professional and technical personnel are required to carry out installation and commissioning. Before use, it is necessary to carefully read this manual and the relevant electrical instructions provided.

1. 2 Each machine and electric control cabinet shall be reliably grounded with a grounding resistance not more than 4Ω.

1. 3 There should be no accumulated water on the table top, especially near the operation box, as it can easily lead to circuit failure due to water infiltration.

The second Delivery inspection

2. 1. Check whether the equipment is damaged and complete upon delivery (according to the packing list). If there is any damage or inconsistency with the contract, please contact the dealer or manufacturer immediately.

2. 2 The manufacturer is only responsible for quality issues arising during production, and is not responsible for damage caused during unpacking, improper installation and use, or damage caused by overload operation.

2. 3 After unpacking, the accompanying documents should be properly kept, as they are necessary during equipment installation, commissioning, and use.mc

The third technical indicators

We can make take up machine,wire drawing machine,layer winding machine,drum packing machine,flux cored forming machine

inding machine,drum packing machine,flux cored forming machine

spooling machine,winding up machine,steel wire take-up machine

Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com