Dia. 3.3mxlength 6.5m Floating Pneumatic Marine Rubber Fender

1. Primary business:
 
2.Product description:

Penumatic rubber fender with chain protection

(1) High energy absorption

The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. ShunDehai rubber ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.

(2) Ultra low back pressure
The inside air of Shundehai pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.

(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of Shundehai sea inflatable fender, its adaptability is much higher than other fender.
 

(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
 

Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.

(5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.
 

(6) Aohai inflatable fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock.

3. Specifications and Measures:

Fender performance specification  










 

Fiber Laser Cutting Machine

Fiber laser cutting machine can be used for both plane cutting and bevel cutting, and the edges are neat and smooth. axis laser. Compared with ordinary carbon dioxide laser cutting machines, it saves space and gas consumption, and has high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product and one of the world's leading technology products.

Main features:
(1) The fiber laser has high electro-optical conversion efficiency, and the conversion efficiency is over 30%. The low-power fiber laser does not need to be equipped with a chiller. The use of air cooling can greatly save power consumption during work, save operating costs, and achieve the highest production. efficiency;
(2) The laser only needs electric energy during operation, no additional gas to generate the laser is required, and the operation and maintenance costs are the lowest;
(3) The fiber laser adopts semiconductor modularization and redundant design, there is no optical lens in the resonant cavity, and no startup time is required. It has the advantages of adjustment-free, maintenance-free, and high stability, which reduces the cost of accessories and maintenance time. Unmatched by traditional lasers;
(4) The output wavelength of the fiber laser is 1.064 microns, which is 1/10 of the wavelength of CO2. The output beam has good quality and high power density, which is very conducive to the absorption of metal materials, and has excellent cutting and welding capabilities. lowest cost;
(5) The optical route of the whole machine is transmitted by optical fiber, no complicated light guide system such as mirror is needed, the optical path is simple, the structure is stable, and the external optical path is maintenance-free;
(6) The cutting head contains protective lenses, so that the consumption of valuable consumables such as focusing lenses is extremely small;
(7) The light is exported through the optical fiber, which makes the design of the mechanical system very simple, and it is very easy to integrate with the robot or the multi-dimensional workbench;
(8) After adding the optical gate, the laser can be multi-machine, divided into multiple channels and multiple machines to work at the same time through optical fiber splitting, which is easy to expand the function, and the upgrade is convenient and simple;
(9) The fiber laser is small in size, light in weight, movable in working position, and small in footprint;

Fiber laser cutting machine, laser cutting machine, cnc laser cutting machine, cnc fiber laser cutting machine

Wuxi Zhouxiang Complete Set of Welding Equipment Co., Ltd. , https://www.beamweldingmachine.com