How do sweeping cars prevent body wear?

Cleaning the surfaces of the sheet metal parts of the sweeper vehicle that are in contact with each other causes wear due to relative motion caused by the force. The greater the force applied, the longer the action time, and the lower the surface hardness of the material, the more severe the wear. The following parts of the body are prone to wear:

1, the body of each hinge hole shaft rotation.

2. The impact and sliding between the lock tongue and the lock, and the intermittent impact between the limit plate surface of the lock tongue shoulder.

3, The sliding of the glass lifter gear contact teeth.

4. The looseness of the hinge hole shaft causes friction between the lower surface of the door and the door frame after the door is lowered.

The lower surface of the hood and the upper surface of the radiator and the upper surface of the fender are in vibrational contact with relative misalignment and the like. The bolt holes after the loosening of the bolts of the sheet metal parts are worn, resulting in an increase in the diameter of the holes. What are the causes and components of cleaning the body surface of the sweeper vehicle?

1, Reason: There is muddy water on the surface of the metal, and oxidation occurs and causes corrosion.

2. After welding, no rust treatment was used to cause corrosion.

3, chemical exposure and chemical corrosion. Behind the cab is a skirt and a skirt.

What are the causes of cracks or breaks in the body of the sweeper?

Causes of cracks or breakages in the car body; internal stress in the process of forming or welding of sheet metal parts; when the sweeping vehicle is running, the body sheet undergoes constant vibration to subject the sheet metal parts to alternating loads; the car accelerates rapidly, and emergency braking occurs. When turning sharp corners, the vehicle body is subjected to inertial force and centrifugal force. When the sweeper sweeps the road surface with poor road conditions, each sheet metal part is subjected to a torsional force. The body has cracked or broken parts.

Joint Plate Making Machine

Carbon steel spun pile end plate in flange with good performance and reliable quality are created by conforming to the development trend of the industry, integrating internal superior resources, and adopting the industry`s cutting-edge manufacturing technology and production process.You can also choose Lathe Machine ,Sheet Shearing And Coil Machine, Grooving Machine, Automatic Falnge And End Plate Connect Machine in our website.

Joint Plate Making Machine,pile joint Plate,pile end plate,end plate for spun pile

Taizhou Amitycare International Co.,Ltd. , https://www.tzamity.com