Japan's OKUMA has successfully developed a new type of CNC machine tool device "OSP-P200" recently, which can be added to the CNC machine tool to prevent mechanical collisions under any operating conditions. The product will be available in the spring of 2005. Whether it is automatic operation based on a machining program, or manual operation during machining preparation or trial machining, the equipped "Anti Crash System" can be checked before the machine is started and automatically stopped before a collision occurs. Operation. The collision prevention system stores a precision three-dimensional model of a machine tool component, a tool, a jig, and a work piece in an NC device. In the manual operation, according to the operator's instructions and before the machine tool is controlled according to the instructions of the machining program during the automatic operation, the three-dimensional model is first used for the simulation operation. In this way, it is possible to detect in advance whether or not a collision will occur, and if a collision is detected, the operation of the machine will be stopped before the collision occurs and the operator will be notified. At present, the Japanese market has a large demand for high value-added processing, and a large number of composite processing machines, five-sided processing machines, and five-axis processing machines are being introduced. Since these machine tools are quite complex, it is highly likely that unexpected collisions and operations will occur during preparation and trial machining. The collision prevention system can greatly reduce the time required for processing preparation and trial machining. The OKUMA test can shorten the time required for processing preparation and test processing by 30-50%. The company plans to exhibit this collision prevention system at the International Manufacturing Technology Show (IMTS, commonly known as the Chicago Show) that opened on September 8, 2004 in Chicago, United States.
The mesh belt dryer is composed of several independent unit sections. The operating parameters of the quantity of drying medium, temperature, humidity and exhaust gas circulation can be independently controlled to ensure the reliability of the dryer and the optimization of operating conditions. The belt dryer is flexible in operation, wet material is fed, and the drying process is carried out in a completely sealed box. The working conditions are good and the leakage of dust is avoided.
Mesh Belt Dryer,Mesh Belt Dryer Machine,Mesh Belt Dryer Equipment,Continuous Mesh Belt Dryer
Griffin Technology Manufacturing Co., Ltd. , https://www.griffindryingeqpt.com