Fortunately, there are several parts of design such as hinges, fiber optic connector bases, and new style connectors are closely dependent on MIM technology. These products are being produced in a large number and MIM technology is being adopted by more and more.
MIM and CIM--Drome can provide one-stop service solution.
The basic attributes include:
1.Economical production of complex parts with weight from 0.03 to 200g from high-performance engineering materials.
2.Parts with high dimensional precision (±0.1%~±0.5%) and good surface quality (surface roughness 1~2μm).
3.Parts with high relative density (96%~100%), homogeneous microstructure and superior performance.
4.Adaptable to powders of various materials and wide application of the parts.
5.Material saving through the recycle of wastes, production process with high level of automation and suitable for mass production
Flow chart of metal injection molding
Application of MIM
Products Range:
Â
Material | Â | Typical Values | Â | Â | ||||
Designation Code | Density g/cm3 | Tensile Properties | Young's modulus, Gpa | Un-notched Charpy Impact Energy,J | Hardness,Rockwell | |||
 |  | UTS. Mpa | Y.S. (0.2%), Mpa | Elongation (in 25.4mm) % |  |  | Macro (apparent) |  Micro (converted) |
MIM-Fe2Ni | 7.8 | 280 | 115 | 25 | Â | Â | 55 HRB | 50HRCÂ Â Â Â |
MIM-Fe8Ni | 7.8 | 450 | Â | 12 | Â | Â | 84HRB | 50HRCÂ Â Â Â |
MIM-2200 (as sintered) | 7.8 | 290 | 125 | 40.0 | 190 | 135 | 45 HRB | Â |
MIM-2700 (as sintered) | 7.8 | 415 | 255 | 26.0 | 190 | 175 | 69 HRB | Â |
MIM-4605 (as sintered) | 7.8 | 440 | 205 | 15.0 | 200 | 70 | 62 HRB | Â |
MIM-4605 (Q&T) | 7.8 | 1655 | 1480 | 2.0 | 205 | 55 | 48 HRC | 55 HRC |
MIM-304L | 7.8 | 500 | Â | 70 | Â | Â | 60 HRB | Â |
MIM-316L (as sintered) | 7.85 | 520 | 175 | 50.0 | 190 | 190 | 67 HRB | Â |
MIM-410 | 7.7 | 900 | Â | 7 | Â | Â | Â | 40 HRC |
MIM-420 (heat treated) | 7.7 | 1380 | 1200 | 12 | 190 | 40 | Â | 45-60HRC |
MIM-430L (as sintered) | 7.8 | 410 | 240 | 25.0 | 210 | 150 | 65 HRB | Â |
MIM-440C | 7.8 | 700 | 590 | 15 | Â | Â | Â | 45-60HRC |
MIM-17-4PH (as sintered) | 7.8 | 900 | 730 | 6.0 | 190 | 140 | 27 HRC | Â |
MIM-17-4PH (heat treated) | 7.8 | 1190 | 1090 | 6.0 | 190 | 140 | 33 HRC | 40 HRC |
Material | Density( g/m 3) | Tensile Strength( Mpa) | elastic modulus( Gpa) | (thermal conductivity) W/(mk) | ( Thermal Expansion) 10-6/k |
Copper(Cu) | 8.9 | 100 | 130 | 250 | 13 |
Invar(fe-36ni) | 8 | 300 | 205 | 20 | 5 |
Kovar Or F15 (Fe-29ni-17co) | 8.0 | 480 | 200 | 17 | 4.9 |
 Molybdenum-copper (Mo-15cu) | 10 | 210 | 280 | 170 | 7 |
 Molybdenum-copper (Mo-20cu) | 9.9 | 200 | 280 | 145 | 6.5 |
 Tungsten-copper (W-10cu) | 17 | 500 | 340 | 209 | 6 |
 Tungsten-copper (W-20cu) | 16 | 560 | 290 | 247 | 7 |
 Tungsten-copper (W-30cu) | 14 | 420 | 260 | 260 | 11 |
product field
Â
Aerospace | Airfoil Hinge,Rocket Nozzle,Guided Missile Spoiler,Turbine Blade Core |
Auto Industry | Ignittion Control Lock Parts,Turbo Charger Rotor,Valve Guide Rail,Break Gear Parts and Sun Block Shack Parts |
Electronics | Disc drive parts,Cable Connector,Electronic Valve Shell,Computer Print Head,Electronic Packaging Parts and Heat Sink Material |
War Industry | Mine Rotor,Gun Trigger,Armor Piercer,Sight Base,Flechette Arrow and Shrapnel |
Medical Industry | Orthopaedic Bracket,Internal Sewing Needle,Biopsy Forceps,Radiation-proof Cover |
Daily Necessities | Watch Shell,Watch Belt,Watch Buckle,Golf head and Ball Seat,Sport Shoe-buckle,PE Mechanical Parts,Hole Puncher,Fish Catch and Bias Hammer |
Mechanical Industry | Irregular Milling Cutter,Cutting Tools,Micro Gears and Sewing Machine Parts |
FAQ
1.How can I give you an offer?
Please send us product 2D/3Ddrawings.
PROCESS
Customer Inquiry →Engineering Communication →Cost Analysis →Sales Analysis →Quote to Customer
» 1 Work Days Only
» Submit RFQ with complete commercial terms
  Â
2. How to transport?
For small quantity, we choose TNT, FEDEX, UPS etc
For big quantity, air or sea would be available .
Â
3. packing details?
We attached our normal packing details Plastic disc/carton.
If the customer has specified packing specification, we will pack according to the customer's requirement.
Company Profile
- Design and manufacture Metal Injection Molding Parts, Ceramic Injection Molding Parts, Plastic Injection Molding Parts
- Current 10,000 Manufacturing Space, 30,000 in Construction;
- More than 200Â Employees, 17 Engineers;
- 2017 Sales Revenue >10 Million USD;
- IATF 16949, ISO 9001, OHSAS 18001, ISO 14001;
- 5% Revenue Yearly Invested in R&D;
- Best Machines, Germany Arburg, Japan Nissei, Japan Shimadzu;etc.;
- Serving Top Players in Industries of Auto, Consumer Electronics, Medical Appliance, etc. ;
 MIM(Metal powder Injection Molding) is the 5th generation of metal forming technology. Over 40 years of development, people gradually find more applications for MIM process especially in the 3C products application. From initial groping to mature stage, MIM technology witness the ups and downs of 3C products in the past ten years.
Fortunately, there are several parts of design such as hinges, fiber optic connector bases, and new style connectors are closely dependent on MIM technology. These products are being produced in a large number and MIM technology is being adopted by more and more.
MIM and CIM--Drome can provide one-stop service solution.
The basic attributes include:
1.Economical production of complex parts with weight from 0.03 to 200g from high-performance engineering materials.
2.Parts with high dimensional precision (±0.1%~±0.5%) and good surface quality (surface roughness 1~2μm).
3.Parts with high relative density (96%~100%), homogeneous microstructure and superior performance.
4.Adaptable to powders of various materials and wide application of the parts.
5.Material saving through the recycle of wastes, production process with high level of automation and suitable for mass production
Flow chart of metal injection molding
Application of MIM
Products Range:
Â
Material | Â | Typical Values | Â | Â | ||||
Designation Code | Density g/cm3 | Tensile Properties | Young's modulus, Gpa | Un-notched Charpy Impact Energy,J | Hardness,Rockwell | |||
 |  | UTS. Mpa | Y.S. (0.2%), Mpa | Elongation (in 25.4mm) % |  |  | Macro (apparent) |  Micro (converted) |
MIM-Fe2Ni | 7.8 | 280 | 115 | 25 | Â | Â | 55 HRB | 50HRCÂ Â Â Â |
MIM-Fe8Ni | 7.8 | 450 | Â | 12 | Â | Â | 84HRB | 50HRCÂ Â Â Â |
MIM-2200 (as sintered) | 7.8 | 290 | 125 | 40.0 | 190 | 135 | 45 HRB | Â |
MIM-2700 (as sintered) | 7.8 | 415 | 255 | 26.0 | 190 | 175 | 69 HRB | Â |
MIM-4605 (as sintered) | 7.8 | 440 | 205 | 15.0 | 200 | 70 | 62 HRB | Â |
MIM-4605 (Q&T) | 7.8 | 1655 | 1480 | 2.0 | 205 | 55 | 48 HRC | 55 HRC |
MIM-304L | 7.8 | 500 | Â | 70 | Â | Â | 60 HRB | Â |
MIM-316L (as sintered) | 7.85 | 520 | 175 | 50.0 | 190 | 190 | 67 HRB | Â |
MIM-410 | 7.7 | 900 | Â | 7 | Â | Â | Â | 40 HRC |
MIM-420 (heat treated) | 7.7 | 1380 | 1200 | 12 | 190 | 40 | Â | 45-60HRC |
MIM-430L (as sintered) | 7.8 | 410 | 240 | 25.0 | 210 | 150 | 65 HRB | Â |
MIM-440C | 7.8 | 700 | 590 | 15 | Â | Â | Â | 45-60HRC |
MIM-17-4PH (as sintered) | 7.8 | 900 | 730 | 6.0 | 190 | 140 | 27 HRC | Â |
MIM-17-4PH (heat treated) | 7.8 | 1190 | 1090 | 6.0 | 190 | 140 | 33 HRC | 40 HRC |
Material | Density( g/m 3) | Tensile Strength( Mpa) | elastic modulus( Gpa) | (thermal conductivity) W/(mk) | ( Thermal Expansion) 10-6/k |
Copper(Cu) | 8.9 | 100 | 130 | 250 | 13 |
Invar(fe-36ni) | 8 | 300 | 205 | 20 | 5 |
Kovar Or F15 (Fe-29ni-17co) | 8.0 | 480 | 200 | 17 | 4.9 |
 Molybdenum-copper (Mo-15cu) | 10 | 210 | 280 | 170 | 7 |
 Molybdenum-copper (Mo-20cu) | 9.9 | 200 | 280 | 145 | 6.5 |
 Tungsten-copper (W-10cu) | 17 | 500 | 340 | 209 | 6 |
 Tungsten-copper (W-20cu) | 16 | 560 | 290 | 247 | 7 |
 Tungsten-copper (W-30cu) | 14 | 420 | 260 | 260 | 11 |
product field
Â
Aerospace | Airfoil Hinge,Rocket Nozzle,Guided Missile Spoiler,Turbine Blade Core |
Auto Industry | Ignittion Control Lock Parts,Turbo Charger Rotor,Valve Guide Rail,Break Gear Parts and Sun Block Shack Parts |
Electronics | Disc drive parts,Cable Connector,Electronic Valve Shell,Computer Print Head,Electronic Packaging Parts and Heat Sink Material |
War Industry | Mine Rotor,Gun Trigger,Armor Piercer,Sight Base,Flechette Arrow and Shrapnel |
Medical Industry | Orthopaedic Bracket,Internal Sewing Needle,Biopsy Forceps,Radiation-proof Cover |
Daily Necessities | Watch Shell,Watch Belt,Watch Buckle,Golf head and Ball Seat,Sport Shoe-buckle,PE Mechanical Parts,Hole Puncher,Fish Catch and Bias Hammer |
Mechanical Industry | Irregular Milling Cutter,Cutting Tools,Micro Gears and Sewing Machine Parts |
FAQ
1.How can I give you an offer?
Please send us product 2D/3Ddrawings.
PROCESS
Customer Inquiry →Engineering Communication →Cost Analysis →Sales Analysis →Quote to Customer
» 1 Work Days Only
» Submit RFQ with complete commercial terms
  Â
2. How to transport?
For small quantity, we choose TNT, FEDEX, UPS etc
For big quantity, air or sea would be available .
Â
3. packing details?
We attached our normal packing details Plastic disc/carton.
If the customer has specified packing specification, we will pack according to the customer's requirement.
Company Profile
- Design and manufacture Metal Injection Molding Parts, Ceramic Injection Molding Parts, Plastic Injection Molding Parts
- Current 10,000 Manufacturing Space, 30,000 in Construction;
- More than 200Â Employees, 17 Engineers;
- 2017 Sales Revenue >10 Million USD;
- IATF 16949, ISO 9001, OHSAS 18001, ISO 14001;
- 5% Revenue Yearly Invested in R&D;
- Best Machines, Germany Arburg, Japan Nissei, Japan Shimadzu;etc.;
- Serving Top Players in Industries of Auto, Consumer Electronics, Medical Appliance, etc. ;
Â
As their name implies, the sliding contact surfaces of Angular Contact Spherical Plain Bearings are spherical in shape and inclined at an angle to the bearing axis . Consequently, these bearings are well suited for accommodating combined (radial and axial) loads. Single angular contact Spherical Plain Bearings can only accommodate axial loads acting in one direction. These bearings can be separated, enabling the rings to be mounted separately.
manufactures steel/PTFE FRP (fibre reinforced polymer containing PTFE) maintenance-free angular contact spherical Plain Bearings as standard. Designs with other sliding surface combinations are available on request (Special designs).
Angular Contact Spherical Plain Bearings
Angular Contact Spherical Plain Bearings,Angular Contact Thrust Spherical Plain Bearings,Angular Contact Spherical Bearings,Angular Radial Spherical Plain Bearing
Ningbo Ritbearing Imp & Exp Co.,Ltd. , https://www.nbbearing.de