1. Installation precautions for LED explosion-proof lights
1. First, check whether the product selection meets the requirements, and check the nameplate and appearance of the product;
2. Read the instruction manual of the product carefully and don't install it blindly;
3. The installation of the LED explosion-proof lamp must be secured firmly, the fastening bolts shall not be replaced at will, and the spring washers shall be complete;
4. The sealing ring for dustproof and waterproof should be placed as it is when installing;
5. At the cable entry point, the cable and the sealing gasket should be closely matched, the cross section of the cable should be round, and the surface of the sheath should not have defects such as unevenness;
6. Excess inlets must be sealed according to the explosion-proof type, and the compression nut must be tightened to seal the inlets;
7. After installation, carefully check whether the installation is firm.
Except metal Briquette Machine, Metal Baler and metal shear, we also provide catalytic converter decanner, aluminum Shredder or steel shredder equipped with briquette machine, and vertical aluminum profile baler, horizontal non-metal plastic and paper baler. With 30 years experience, we have much experience on kinds of recycling machines.
Metal Processing Machine,Iron Processing Machine, Steel Processing Machine, Copper Processing Machine, Scrap Processing Machine
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecometalrecycle.com