PS-126 Self-Sucking Pump for Watering Gardens& Boosting Insufficient Mains Water Pressure

Model NO.: PS-126
Power: Electric
Start Up: Electric Pump
Type: Peripheral Water Pump
Application: Submersible Pump
Industry: Mechanical Pump
Media: Clean Water Pump
Performance: No Leakage Pump
Theory: Centrifugal Pump
Impeller: Brass
Motor Housing: Aluminum/Cast Iron
Trademark: GAWIN
Transport Package: Carton
Specification: 280*170*195
Origin: China
HS Code: 84137099
PS-126 SELF-SUCKING PUMP
BRIEF INTRODUCTION
With a small tank over its impeller, PS series pumps are a good solution for self-priming. 
And also it is with peripheral impeller and gains high pressures relative and its curves are steep particularly. 
The wide range of PS series is particularly suitable for domestic applications and the automatic distribution of water from surge tanks, 
watering gardens and for boosting insufficient mains water pressure, reliable, economic and simple to use. 
These pumps should be installed in a covered area, protected against the weather.
And also it is with peripheral impeller and gains high pressures relative and its curves are steep particularly. 

APPLICATION

  • 1. The pump have a compact size and simple to use.
  • 2. Heavy duty continuous work.
  • 3. Ambient temperature up to 40ºC.
  • 4. The thermal protector is installed if required.
  • 5. The shaft is 45# steel or stainless steel and not easy to rust.
  • 6. 220-240V 50HZ power which is safer for your using.
  • 7. The stator is 100% copper wire with high quality.

OPERATING CONDITION

  • 1. Liquid temperature up to 60
  • 2. Ambient temper up to 40
  • 3. Total suction lift to 9m
  • 4. Continuous duty

CONSTRUCT

Pump

  • Pump body: Cast Iron
  • Impeller: Brass    
  • Mechanical seal: Carbon/ceramic/Stainless Steel  

Motor

  • Single Phase
  • Heavy Duty Continuous Work
  • Motor Housing: Aluminum 
  • Shaft: Carbon Steel/ Stainless steel   
  • Insulation class: B and F    
  • Protection class: IP44 or IP54  
  • Cooling:Externally ventilation
MATERIAL AND WORKING LIMITS
Pump body: Cast iron
Impeller: Brass
Motor Housing: Steel
Mechanical seal: Stainless steel (graphite to ceramic)
Shaft: 45#steel or stainless iron
Bearing: SKF/NTN/NSK/CHINA
Insulation: B and F
Protection class: IP44 and IP54

    TECHNICAL DATA(220-240V/50HZ)

    Model Power   Q.max. H.max. Suct.max. Speed Pump dia. PACKAGE DIMENSIONS & GW
      HP KW L/min m m r.p.m Inlet/Outlet A B H Kg
    PS-126 0.33 0.25 35 28 9 2850 1"*1" 170 280 195 7.5
    AUPS-126 0.33 0.25 35 28 1"*1" 230 310 290 9
    MQS-126 0.5 0.37 35 33 1"*1" 180 245 250 8.5
     PS-126 Self-Sucking Pump for Watering Gardens& Boosting Insufficient Mains Water Pressure
    PS-126 Self-Sucking Pump for Watering Gardens& Boosting Insufficient Mains Water Pressure
     

    Technical Support

    Intertech Machinery Inc. , https://www.taiwanmouldmaker.com