Refrigerated trucks are very common in life and are often used to transport some fruits and vegetables, dairy products or other enclosed vans that require frozen foods, and are dedicated transport vehicles equipped with refrigeration units for refrigeration units. However, there are many misunderstandings in the use of refrigerated truck chillers. The following are some of the most common misunderstandings I've summarized for you to help you properly understand and use chillers.
Misunderstanding 1: The greater the refrigeration capacity of refrigerator cars , the better.
The advantage of large refrigeration capacity is that the cooling rate of the box is fast, the pressure in the compressor system drops quickly, and the horsepower consumption of the engine is less.
However, the disadvantage is that the amount of electricity consumed by the battery is relatively large, and the battery is often depleted, and the phenomenon of fire cannot be sustained. This is particularly the case with diesel vehicles.
The best principle for refrigerating trucks to install refrigerators is to match them. It's not good if they are big and small.
Myth: Close refrigerated trucks unloading goods chiller assembly
When loading and unloading, the refrigeration unit must be turned off. Many people do not shut down the refrigeration unit when loading or unloading cargo, thinking that this can make the temperature of the goods rise more slowly. In fact, this is a very wrong understanding. If the refrigeration unit is not turned off, when the door of the car is opened, because the fan of the evaporator of the refrigeration unit is working, the fan blows the cool air from the upper part of the cabin, and the lower part will rapidly suck in the hot air from outside, resulting in the rapid increase of the temperature inside the cabin. If the goods are shut down and then loaded and unloaded, the air flow stops due to the fan being stopped, the air pressure inside and outside the cabin is the same, and the speed of the hot air entering outside is slower.
Misunderstanding 3: The greater the refrigeration capacity of refrigerator cars , the better.
The advantage of large refrigeration capacity is that the cooling rate of the box is fast, the pressure in the compressor system drops quickly, and the horsepower consumption of the engine is less.
However, the disadvantage is that the amount of electricity consumed by the battery is relatively large, and the battery is often depleted, and the phenomenon of fire cannot be sustained. This is particularly the case with diesel vehicles.
The best principle for refrigerating trucks to install refrigerators is to match them. It's not good if they are big and small.
Misunderstanding 4: The less goods, the better the temperature?
The smaller the goods, the greater the volume of air inside the box, which is one of the reasons why Mengniu's probiotic milk temperature is difficult to fight.
Reasons: 1) The volume of air is too large for half-car goods.
2) Fermentation of heat produced by the goods themselves.
Myth 5: Refrigerated cars are cold storage
A refrigerated truck is not a cold storage. In the concept of many people, a refrigerating unit on a refrigerated truck is free to freeze or heat the cargo loaded into the compartment to its required temperature. In fact, the refrigeration unit is used to maintain the temperature of the cargo, not to reduce the temperature of the cargo. It is similar to the quilt used to sell cold drinks in the past. It wraps the goods. When the outside temperature passes radiation, conduction, and convection into the compartment of the refrigerated truck, it will be carried away by the cooling air blown by the refrigeration unit, blocking the heat source from entering the goods.
The above are some of the practical misunderstandings of refrigerating truck refrigerators compiled by Xiao Bian. We hope to help everyone.
Flaking Machine For Soybean Cotton Seed Oil Extraction
Flaking machine is mainly made up of two or more opposite rotating rolls (high nickel chrome molybdenum alloy), when fuel material (soybeans, peanuts, seeds, etc.) through two roll by the moment when the extrusion formation of embryo, and the first rolled out the oil, then leaching formed by refining finished cooking oil. Is a typical extrusion equipment.
Mill is a key equipment to vegetable oil processing enterprises pretreatment process, it is to rely on the clamping force between the two roller by granular material extrusion into thin slices of the technological process, the common problems of the previous production of the mill is the rigidity is not good, and roll back down without buffer device.I plant production mill work smoothly, the operation is simple, flexible and reliable performance, and is equipped with buffer device between roll, the roll for collision damage rate to a minimum extent.
DingZhou YongSheng Grain and Oil Machinery Co., LTD is a professional company combining research and development design, production and sales as a whole. The company has first-class oil equipment manufacturing base, professional oil technology engineer and professor, possesses advanced production technology and sophisticated equipment, All the mechanical parts are manufactured by our company.
The complete sets of oil equipment that we manufactured, relying on many domestic scientific research institutions. Advanced technology, suitable for making all kinds of plant oil. From the raw material of cleaning up, prepressing, leaching, refining and the production processing of by-product (such as Phospholipids engineering, protein engineering), is totally a dragon design and production, has created considerable economic benefit and social benefit for the user and society more than 40 years. Company new development of biodiesel equipment technology in recent years, has put dozens of sets on the market, obtaining good economical benefits both In the domestic and overseas. At present, we have hundreds of successful installation operation of the oil equipment engineering experience, can design and product according to the difference of the user's economic condition. raw material regional, install oil equipments.
YongSheng comapny with scientific management method, strives for perfection the manufacturing process, innovative manufacturing idea, fast grows and become the grain and oil machinery production and export base in China. Company products are exported to Russia, India, Nepal, Indonesia, South Africa,Tanzania,Ethiopia,Ukraine, kazakhstan, Pakistan, Iran, north Korea, Vietnam, France and the European Union and so on more than 30 countries and area.
Flaking Machine For Soybean Cotton Seed Oil Extraction
Vegetable Oil Extraction Machine,Oil Extraction Machine,Oilseeds Flaking Machine,Cooking Oil Machine
Dingzhou Yongsheng Grain & Oil Machinery Co.,Ltd. , https://www.oilpresschina.com