Bearing unit (FLUW) supplied by front cover drum washing machine
In the conventional manufacturing process, the bearing unit of the front cover drum washing machine requires a larger size aluminum or cast iron sleeve, and the bearing housings at both ends are also machined. Only the sleeve and the plastic washing machine drum are injection molded together to install the bearings at both ends, and then fitted with a lubricant-filled clamping seal.
The FLUW from SKF simplifies and integrates the above process, integrating ball bearings, clamping seals, lubricants and housings (see Figure 1). Compared to traditional manufacturing processes, the FLUW assembly process is much simpler (see Table 1 for details).
In addition to the simple installation, FLUW can also achieve better mutual cooperation between parts; due to the SKF patented anti-slip system, the outer ring can be fixed in the bearing housing without relative rotation; the weight is lighter; the cost is reduced. FLUW currently has two solutions for lower load drum washers and higher load drum washers. At present, FLUW has achieved supply to one washing machine manufacturer in Europe and the United States.
Compared to the top-mounted drum washing machine, the front-cover drum washing machine has more requirements on the bearing unit, such as to withstand greater forces, moments and loads.
Working condition: maximum centrifugal speed = 1600rpm
Working temperature = 90 ° C
Bearing unit (TLUW) supplied by the top-mounted drum washing machine
Traditionally, the cover drum washing machine bracket is based on a tight fit of a rolling bearing mounted in an aluminum bearing housing, and the bearing housing, bearing and seal are from different suppliers. SKF's TLUW (see Figure 2) combines the four components of a rolling bearing, a snap seal, a lubricant and a nylon housing to simplify the assembly process of the washing machine and reduce costs and parts suppliers. In addition, the material of the nylon bearing housing can be selected according to different needs of users. Currently, TLUW has sold 3 million units worldwide.
Working condition: maximum centrifugal speed = 1400rpm
Working temperature = 90 ° C
Bearing bracket (spider arm) designed for large-capacity front-cover drum washing machine
The spider arm is also an integrated unit that includes a lubrication system, ball bearings and a snap seal that supports the entire drum. It is mainly used in front cover type domestic or industrial drum washing machines with a large carrying capacity (loading capacity ≥ 8kg). Compared to TLUW and FLUW, the spider arm (see Figure 3) has higher stiffness, higher load, and better fit. Similarly, it can reduce the customer's installation process, reduce costs, and reduce suppliers.
Range and internal dimensions:
Aperture: 30mm~42mm is better
Bracket outer diameter: 600mm
Axial clearance: custom range
Installation conditions: outer ring: press fit into the bearing housing
Inner ring: freely movable on the shaft
Metal Gasket Products Features
Wide range of applicable working condition,high temperature and high pressure resistance,applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium,through change of composition of gasket.
Strong stress compensation,stable and reliable sealing performance even under frequent pressure fluctuation condition.
Perfect sealing performance.
Normal requirement of flange surface finishing which contact with gasket.
Easy installation and low pre-tightening stress of gasket.
Technique
Using photo etching not laser cut or stamping. By photo etching, the edges of the springs is smooth without any burr. By stamping, the mold cost is high and the thin products will be out of shape easily, but photo etching will keet the thin products flat enough.
Chemical Resistant Gasket,Metal Gasket With Flange,Flat Ring Metal Gasket,0.02Mm Thickness Metal Gasket
Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tyceqt.com