Quick Soil Moisture Analyzer is a GPS positioning system to master the distribution of soil moisture (water content) to provide scientific basis for differential water-saving irrigation. At the same time, accurate water supply is also conducive to improving crop yield and quality. This measuring instrument was only able to measure the soil moisture at the very beginning, but later added the function of measuring the soil temperature because of the customer's needs. This test instrument has three different models, namely TZS-IW type, TZS-W type, TZS-IIW type. Here's a simple look at the differences between these three instruments:
model
TZS-IW type
TZS-W type
TZS-IIW type
Functional differences
The direct measurement shows the soil moisture and temperature content. It has data storage and is stored directly on the host.
The RS-232 communication interface communicates with the computer. The dedicated data download software can directly measure the soil moisture and temperature values, and can also measure the time and moisture and temperature content data of each sampling in real time, store it in the host computer, and can be connected with the computer. The data is exported and the software has a storage and printing function (software give-away) to analyze the moisture distribution in the computer.
With all the features of TZS-W, GPS positioning has been added. While measuring the soil moisture content and temperature, together with the GPS can measure the precise information (longitude, latitude) of the measuring point, the position information of the sampling point can be displayed directly, and thus, the spatial difference of soil moisture can be reflected. Not only is it beneficial to the implementation of water-saving irrigation, but the precise water supply also helps to increase the yield and quality of crops. The automatic sampling and processing of water content and three-dimensional position information are realized. The signals of sensors and GPS receivers are processed and the corresponding data are calculated. The functions of display, storage and communication are available, and the distribution of moisture can be analyzed in the computer. .
Selective Laser Sintering - Sls
Stereo Light Curing Molding - Sla
It mainly uses photosensitive resin as a raw material, and utilizes the characteristic that liquid photosensitive resin will cure quickly under ultraviolet laser beam irradiation. The photosensitive resin is generally liquid, and it immediately initiates a polymerization reaction and completes curing when irradiated with a certain wavelength of ultraviolet light (250 nm to 400 nm). SLA focuses on the surface of the light-curing material by focusing ultraviolet light of a specific wavelength and intensity to solidify it sequentially from point to line and from line to surface, thereby completing the drawing of a layered cross-section.
Selective Laser Sintering - Sls,Sls 3D Printing Service,Laser Sintering 3D Printing,Selective Laser Printing
Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-machining.com