Product Description
Â
410 Stainless Stee Hex Flange Head Self-drilling Metal Screw with Neoprene Washer
This hex flange head self-drilling screws are made of stainless steel and have a sheet metal thread with a self-drilling cutting  point to pierce through metal steel, aluminium, wood etc., including structural steel.Stainless Steel 410 is harder than stainless 18-8/304 or 316, very ideal choice for metal sheet, structure steel etc.Â
Hex head self drilling sheet metal screws are installed with a wrench or hex nut setter. Ruspert Plated can reach salt test 1000 hours, greatly improved the anti-rust and corrosionperformance.Â
Neoprene Washer can create a seal that withstands liquid and gas pressure.
Specification
Â
| Type | Self-drilling Screw /Tek Screw /Â Roof Screw |
| Grade | SUS410(Martensite), Hardened |
| Head Type | Flange  Head |
| Drive Type | Exterior Hex |
| Thread Type | "C" |
| Point Type | #2 Tek Point |
| Diameter | #10 ~ 1/4, 4.8 ~ 6.3mm |
| Length | 1/2" ~Â 10", 13~ 250mm |
| Standard | DIN, ANSI, JIS, IFI |
| Stock | Unavailable |
Contact
If you're insterested in our Products, please do not hesitate to send us an email  or call us at +86 18072687675 (Mobile)directly.Â
Product Description
Â
410 Stainless Stee Hex Flange Head Self-drilling Metal Screw with Neoprene Washer
This hex flange head self-drilling screws are made of stainless steel and have a sheet metal thread with a self-drilling cutting  point to pierce through metal steel, aluminium, wood etc., including structural steel.Stainless Steel 410 is harder than stainless 18-8/304 or 316, very ideal choice for metal sheet, structure steel etc.Â
Hex head self drilling sheet metal screws are installed with a wrench or hex nut setter. Ruspert Plated can reach salt test 1000 hours, greatly improved the anti-rust and corrosionperformance.Â
Neoprene Washer can create a seal that withstands liquid and gas pressure.
Specification
Â
| Type | Self-drilling Screw /Tek Screw /Â Roof Screw |
| Grade | SUS410(Martensite), Hardened |
| Head Type | Flange  Head |
| Drive Type | Exterior Hex |
| Thread Type | "C" |
| Point Type | #2 Tek Point |
| Diameter | #10 ~ 1/4, 4.8 ~ 6.3mm |
| Length | 1/2" ~Â 10", 13~ 250mm |
| Standard | DIN, ANSI, JIS, IFI |
| Stock | Unavailable |
Contact
If you're insterested in our Products, please do not hesitate to send us an email  or call us at +86 18072687675 (Mobile)directly.Â
HP Wear Plate is easily formable due to its mild steel base, and is easily welded without preheating. A cross-checked crack pattern on the wear surface relieves stresses and supports ductility-which is necessary when forming the plate to curved shapes. Due to its high percentage of chromium carbide, HP wear plate has a very low coefficient of friction and will polish to a mirror finish; thus, increasing lubricity and ultimately, material flow-this is especially important in prevention of buildup in coal chutes and of carryback on dozer faces.
HP Wear Resistant Group offers various products of wear plates namely Cr-Carbide Weld Clad Plates, Smooth Surface CCO plate, Heat Treated Wear Plates (AR Plate or Q&T Steel), Casting Plates, Tungsten Carbide Coated Plates in various grade and multiple size options.
The low carbon steel base plate enables the plate to be welded, bolted or studded to existing structures, while the hard facing provides the premier wear-resistant surface capable of working in all applicable service conditions at either ambient or elevated temperatures.
Due to its excellent properties, HP Wear Plates work for long-lasting service life and superb performance, which are well applied to the industries like Cement Plant, Steel Mill, Mining Site, Power Generation, Construction where need combat with abrasion.
Steel Plate,Wear Plate Liner,Ptaw Wear Resistant Liners,Welding Wear Resistant Alloy Steel,CCO Wear Plate
HuiFeng Wear Resistant Group , https://www.hpwearsolution.com