Trunnion Mounted Gear Operated Ball Valve

  • Model NO.: TM GO FE BALL VALVE
  • Connection Form: Flange
  • Nominal Pressure: 150lb to 2500lb
  • Structure: Fixed Ball Valve
  • Function: on-off
  • Application: Industrial Usage, Water Industrial Usage
  • End Type: Flanged End and Butt Welded End
  • Ball Type: Trunnion Mounted and Floating Ball
  • Seat: Soft Seat and Metal Seat
  • Trademark: front
  • Specification: ce
  • HS Code: 84818010
  • Material: Carbon Steel,Stainless Steel,Alloy Steel
  • Driving Mode: Manual
  • Channel: Straight Through Type
  • Type: Fixed Ball Valve
  • Temperature: Normal Temperature
  • Size: 2" to 48" or Larger
  • Port: Full Bore and Reduce Bore
  • Pressure: 150lb to 2500lb
  • Entry Type: Side Entry and Top Entry
  • Transport Package: Plywood Case
  • Origin: China
Cast steel and Forged steel trunnion mounted Ball Valves

Standard compliance:
1) Design and manufacture: API6D, API608, BS5351, ANSI B16.34
2) Test and inspection: API6D, API598
3) Face to face dimensions: ANSI B16.10
4) Flanged end: ANSI B16.5, B16.47 SERIES A & SERIES B
5) Butt-welding end: ANSI B16.25
6) Fire safe: API607, API6FA
7) Other standards (DIN, BS, JIS) is also available upon request.

Specifications:
1) Size: 2" to 48"
2) Class: 150LB to 2500LB
3) Type: Floating ball and trunnion mounted, full bore or reduced bore, soft seated or metal seated, top entry or side entry, one-piece/two-piece/three-piece, anti-blow out stem, antistatic design
4) Material: WCB, WCC, WC6, WC9, C5, C12, CF8, CF8M, CF3, CF3M, CN7M, LCB, LCC, LF2, A105, F304, F316, F304L, F316L, F11, F22, DUPLEX SS, MONEL, ALLOY 20, CAST IRON etc
5) Operation: Lever or Gear operation

Cast Steel Ball Valves - Trunnion Ball Type  Class 150 / 300 / 600 / 900 / 1500 / 2500
Design and manufacture: API 6D, API 608 , BS5351
                             ANSI B16.34
Test and inspection: API6D, API 598.
Face to face dimensions: ANSI B16.10
End flange dimensions: 2"~24" to ANSI B16.5
over 26" to MSS SP-44
      to B16.47 SERIES A
      to B16.47 SERIES B
Butt-welding ends: ANSI B16.25
Fire safe: API607, API6FA
 
Materials of body/bonnet and trim
Body/bonnet WCB, LCB, LCC, WC1, WC6, WC9, C5, C12, CF8, CF8M, CF3 and CF3M etc.
Ball SS304/SS316/S304L/SS316L
Seat PTFE, NYLON, METAL TO METAL
 
Type of operation: hand wheel, gear, electric or pneumatic actuator etc.
 
Standard materials of parts
No. Parts Materials
1 Body ASTM A216 WCB
2 Bonnet bolt ASTM A193 B7
3 Bonnet nut ASTM A194 2H
4 Gasket PTFE
5 Bonnet ASTM A216 WCB
6 Ball SS304
7 Seat ASTM A182 F6
8 Spring AISI 6150
9 Seat ring PTFE
10 O-ring VITON
11 Stem A182 F6a
12 Stem-beating Cu-Pb Alloy
13 O-ring VITON
14 Gland flange ASTM A216 WCB
15 Stem packing PTFE or Flexible graphite
16 Yoke ASTM A216 WCB
17 Gear operation Ductile iron
18 Small ball SS304
19 Small spring SS304
20 Injection fitting  
21 Plug AISI 1025

Dimensions (in mm & inch) and weight
Class 150
DN 50 65 80 100 150 200 250 300 350 400 450 500 600 700
NPS 2 2.1/2 3 4 6 8 10 12 14 16 18 20 24 28
L(RF) 178 191 203 229 394 457 533 610 686 762 864 914 1067 1245
L1(BW) 216 241 283 305 457 521 559 635 762 838 914 991 1143 1346
L2(RTJ) 191 203 216 241 406 470 546 622 699 775 876 927 1080  
H 153 165 195 213 272 342 495 580 625 720 790 840 1050 1150
Do (W) 400 400 600 850 1100 1500 *350 *350 *600 *600 *800 *800 *800 *800
RF (Kgs) 15 19 38 65 97 160 240 390 510 750 895 1190 2100 3000
BW (Kgs) 13 17 35 55 92.8 154 227 365 478 711 868 1138 2015 2900
 
Class 300
DN 50 65 80 100 150 200 250 300 350 400 450 500 600 700
NPS 2 2.1/2 3 4 6 8 10 12 14 16 18 20 24 28
L(RF) 216 241 283 305 403 502 568 648 762 838 914 991 1143 1346
L1(BW) 216 241 283 305 457 521 559 635 762 838 914 991 1143 1346
L2(RTJ) 232 257 298 321 419 518 584 664 778 854 930 1010 1165 1372
H 153 165 195 213 272 342 495 580 625 720 790 840 1050 1150
Do (W) 400 400 600 850 1100 1500 *350 *350 *600 *600 *800 *800 *800 *800
RF (Kgs) 18 27 47 80 118 200 365 530 740 1030 1320 1540 2600 3900
BW (Kgs) 14 22 38 65 105 185 342 503 713 1000 1285 1498 2540 3825

Class 600
DN 50 65 80 100 150 200 250 300 350 400 450 Activated Carbon Rotary Kiln

JHR series Activated Carbon Regeneration equipment is a series of equipment for activated carbon fire regeneration developed by Changchun Gold Research Institute Co., Ltd. in the 1990s and put on the market. After more than 30 years of application and continuous development, the series of equipment has been changed according to different heat sources. Three series of products are derived, the JHR-O series with diesel-flavored heat source, the JHR-A series with natural gas as the heat source, and the JHR-E series with electric energy as the heat source.

This series of equipment can regenerate various types of activated carbon such as coal, wood, nut shell, mineral (petroleum), or powder, granule, column, or primary, extruded, and re-formed activated carbon, according to the characteristics of activated carbon fire method regeneration treatment , This series of equipment is equipped with unique flue gas treatment equipment to ensure the green and environmental protection of the activated carbon fire method regeneration process.

Activated Carbon Regeneration Kiln,Kiln Furnace,Activated Carbon Regeneration,Elution Of Gold From Activated Carbon

Changchun Gold Research Institute Co.LTD , https://www.changchungoldresearch.com