Weak motor room cabinet routing tools and tips

Finishing the line is an important part of the construction of the weak motor room. Why should the line be sorted out, because it is better to have a corresponding port during the later maintenance. This is the ultimate goal of a neat route.

Evaluating a worker's level of integrated wiring is also mainly due to his proficiency, importance, clarity, and cleanliness.

Tools: cable clamp, cable organizer, cable management frame, bridge holder, line card, cable tie, tape, crystal head and wire processing equipment.

Especially important: label paper.
Â

basic method:

1, can use the line tool, do not use your hand.

2, the crystal head and the network cable connection port, must be seamless.

3, can use the line card, do not use cable tie.

4, the label should be laid.

Trace skills:

How to go well in the cabinet wiring, a large part of it has been decided in the cabinet structure design stage. The general cabinet wiring, there are the following tips:

1. Use the cable rack. The cabinet cabling is white. It is a 1U or 1SU sheet metal part with N teeth. The length of the teeth is long and short, depending on the size of the network equipment and the turning radius of the cable used.

2. Use a line bridge. The so-called line bridge is a radius-like structure that protrudes in the cabinet like a small bridge. It can be understood as the place where the cable can protrude from the cabinet board. The general line bridges will appear in the following places: the sub-cabin partitions of the cabinet, the columns, and the square hole strips of the installation equipment panels.

3. Use a reel. This is the same as the cable management frame and is generally used for fiber finishing of communication equipment.

4, flexible use of the (walking) spool. The so-called "walking" bobbin refers to the place on the subdivision partition when the lanes need to be routed in different subdivisions. The general entry (travel) spool appears in two compartments that need to be isolated from each other, such as between the equipment compartment and the battery compartment.

5. Use cable ties and labels. This is also mentioned in the basic method. It is very important that the cable tie is simple and flexible to use, and the label makes it easy to identify after the wiring and reduces the difficulty of maintenance.

And the most important thing: you need a reliable construction team.

Skincare Packaging Tube

Skincare packaging tubes are popular for several reasons. Firstly, they are lightweight and easy to carry around, making them perfect for travel or on-the-go use. Secondly, they are hygienic and help to keep the product fresh and free from contamination. Finally, they are easy to use, with a simple twist or squeeze mechanism that allows the product to be dispensed easily.

Some common types of skincare packaging tubes include:

1. Squeeze tubes: These are the most common type of skincare packaging tube, with a simple design that allows the product to be dispensed by squeezing the tube.

2. Pump tubes: These tubes have a pump mechanism that allows the product to be dispensed without the need for squeezing.

3. Roll-on tubes: These tubes have a rollerball applicator that allows the product to be applied directly to the skin.

4. Airless tubes: These tubes use a vacuum mechanism to dispense the product, which helps to keep it fresh and free from contamination.

Overall, skincare packaging tubes are a versatile and convenient way to store and dispense skincare products, and are a popular choice for both consumers and skincare brands alike.

Skincare Packaging Tube,Skin Care Tube Packaging,Plastic Extruded Tube Packaging,Cosmetic Tubes

Suzhou Sanxin Tube Co.,Ltd. , https://www.zjpackagingest.com