Model NO.: EP-200
Heating Mode: as Required
Paint Mist Treatment: Dry-type
Condition: New
Trademark: EMPIRE
Transport Package: Standard Export Package
Specification: need 20 feet container
Origin: China
HS Code: 84198990
Model NO.: EP-200
Heating Mode: as Required
Paint Mist Treatment: Dry-type
Condition: New
Trademark: EMPIRE
Transport Package: Standard Export Package
Specification: need 20 feet container
Origin: China
HS Code: 84198990
 spray booth for car equipment for auto paintÂ
Specification:Â
Dimensions | Length | Width (mm) | Height (mm) |
Booth Outside | 7000mm/277.6" | 5200mm/206.6" | 3500mm/141.7" |
Booth Inside | 6900mm/271.6" | 3900mm/153.5" | 2750mm/108.3" |
Entrance Door | Equipped with Handle &Â Lock, with tempered glass window | 3000mm/118.1" | 2700mm/106.3" |
Personnel Door | Equipped with Handle &Â Anti-Explosion Lock,with tempered glass window | 800mm/31.5" | 2000mm/78.7" |
Item | Total Power 16 KW; 380v/3phase/50hz | Noise <Â 80 db | |
1.Walls&Ceiling | EPS colorful steel skin board, Wall Panels: 50 mm thick, steel sheet thickness:0.476mm, galvanized steel roof panel. | ||
2.Basement System | Metal Pedestal (Galvanized), with Filter tray* 2rows & a pair of car ramps | ||
Grid Plates (Galvanized)* 2rows | |||
Diamond Plates (Powder Coated or Galvanized)* 3rows | |||
3.Heating System | Italy RIELLO G20 diesel burner *Â 1unit, 180000Kcal/h. | ||
Heating Exchanger (SUS304 Stainless Steel material)* 1unit | |||
8~15 minutes reaching the baking temperature 60~80 degree Celsius | |||
Cabinet (rock-wool insulation) *Â 1unit; Air Ducts *Â 2pcs | |||
4.Filter System | Primary Filter* 1set, filtering rate >Â 83% | ||
Air-Intake Filter* 1set, filtering rate >Â 97% | |||
Air-Exhaust Filter* 1set, filtering rate >Â 70% | |||
5. Air System | Air-Intake Fans* 2units, Centrifugal Fans with 4Â KW motor each | ||
Air-Exhaust Fan* 1unit, Centrifugal Fans with 5.5 KW motor | |||
Air velocity 0.35 m/s | |||
Cabinet for the fans* 1unit, and Air Ducts* 3pcs, and Air Damper (electric)* 1unit | |||
6. Illumination | Ceiling Lights 8*4=32pcs, 40w each, with Light Fixtures, anti-explosion design, CE &Â UL approved | ||
Side Lights 8*4=32pcs, 40w each, with Light Fixtures, anti-explosion design, CE &Â UL approved | |||
7. Control Panel | *1unit, including Spray Switch, Baking Switch, Light Switch, Emergency Stop, etc. | ||
** Included | All Hardware, Fasteners, and Sealants |
YANTAI EMPIRE INDUSTRY&TRADE CO.,LTD is a company making efforts to supply quality garage equipment including Frame Machine, Booth, Heater and Burner, lift, Tire Changer, Wheel Balancer,Wheel Aligner, Decoder, Key Programmer, Oil Drainer, Tools Cabinet,Air Compressor, Jack & Stand, Crane, Pressing Machine etc. Also we could supply parts and accessories for auto repairing shops, such as hydraulic cylinder for lifts, turning plate for wheel aligner, weights for wheel balancer etc.Â
Â
Our products have been selling to worldwide countries as Canada, U.S, Colombia, U.K, Ireland, Sweden, Poland, Finland, Hungary, Norway, The Netherlands, Deutschland, Denmark,Bolivia, Latvia, Slovenia, UAE, Saudi Arab, Malaysia, Mongolia ,South Africa ec.Â
Â
From various customers we learnt various experiences in manufacturing applications, and businesses.We have been improved much of the products and are always will to continuously improve.
Any need, please feel free to contact meÂ
Â
Â
 spray booth for car equipment for auto paintÂ
Specification:Â
Dimensions | Length | Width (mm) | Height (mm) |
Booth Outside | 7000mm/277.6" | 5200mm/206.6" | 3500mm/141.7" |
Booth Inside | 6900mm/271.6" | 3900mm/153.5" | 2750mm/108.3" |
Entrance Door | Equipped with Handle &Â Lock, with tempered glass window | 3000mm/118.1" | 2700mm/106.3" |
Personnel Door | Equipped with Handle &Â Anti-Explosion Lock,with tempered glass window | 800mm/31.5" | 2000mm/78.7" |
Item | Total Power 16 KW; 380v/3phase/50hz | Noise <Â 80 db | |
1.Walls&Ceiling | EPS colorful steel skin board, Wall Panels: 50 mm thick, steel sheet thickness:0.476mm, galvanized steel roof panel. | ||
2.Basement System | Metal Pedestal (Galvanized), with Filter tray* 2rows & a pair of car ramps | ||
Grid Plates (Galvanized)* 2rows | |||
Diamond Plates (Powder Coated or Galvanized)* 3rows | |||
3.Heating System | Italy RIELLO G20 diesel burner *Â 1unit, 180000Kcal/h. | ||
Heating Exchanger (SUS304 Stainless Steel material)* 1unit | |||
8~15 minutes reaching the baking temperature 60~80 degree Celsius | |||
Cabinet (rock-wool insulation) *Â 1unit; Air Ducts *Â 2pcs | |||
4.Filter System | Primary Filter* 1set, filtering rate >Â 83% | ||
Air-Intake Filter* 1set, filtering rate >Â 97% | |||
Air-Exhaust Filter* 1set, filtering rate >Â 70% | |||
5. Air System | Air-Intake Fans* 2units, Centrifugal Fans with 4Â KW motor each | ||
Air-Exhaust Fan* 1unit, Centrifugal Fans with 5.5 KW motor | |||
Air velocity 0.35 m/s | |||
Cabinet for the fans* 1unit, and Air Ducts* 3pcs, and Air Damper (electric)* 1unit | |||
6. Illumination | Ceiling Lights 8*4=32pcs, 40w each, with Light Fixtures, anti-explosion design, CE &Â UL approved | ||
Side Lights 8*4=32pcs, 40w each, with Light Fixtures, anti-explosion design, CE &Â UL approved | |||
7. Control Panel | *1unit, including Spray Switch, Baking Switch, Light Switch, Emergency Stop, etc. | ||
** Included | All Hardware, Fasteners, and Sealants |
YANTAI EMPIRE INDUSTRY&TRADE CO.,LTD is a company making efforts to supply quality garage equipment including Frame Machine, Booth, Heater and Burner, lift, Tire Changer, Wheel Balancer,Wheel Aligner, Decoder, Key Programmer, Oil Drainer, Tools Cabinet,Air Compressor, Jack & Stand, Crane, Pressing Machine etc. Also we could supply parts and accessories for auto repairing shops, such as hydraulic cylinder for lifts, turning plate for wheel aligner, weights for wheel balancer etc.Â
Â
Our products have been selling to worldwide countries as Canada, U.S, Colombia, U.K, Ireland, Sweden, Poland, Finland, Hungary, Norway, The Netherlands, Deutschland, Denmark,Bolivia, Latvia, Slovenia, UAE, Saudi Arab, Malaysia, Mongolia ,South Africa ec.Â
Â
From various customers we learnt various experiences in manufacturing applications, and businesses.We have been improved much of the products and are always will to continuously improve.
Any need, please feel free to contact meÂ
Â
Â
Handheld electric dot marking machine also known as handheld dot matrix electric marking machine, it USES high frequency micro impact needle marking technology, marking without the need for pneumatic source can work. Handheld electric point marking machine standard model is the non-slip fixed fixture, it can be any metal or plastic material of large workpieces for marking. At present many flange, automobile, engine, generator, heavy machinery, steel plate and other enterprises are very suitable for the choice of this model. Hand - held electric point marking machine of one - piece design, in the use of time - varying more convenient. Advantages of this model: 1. High-speed response of CPU; 2. More stable performance of industrial motherboard; 3. Hd color screen touch is more sensitive; 4. Electromagnetic needle marking needs no maintenance; |
Handheld Electric Dot Peen Marking Machine
Handheld Electric Dot Marking Machine,Electric Dot Peen Marking Machine,Mini Dot Peen Marking Machine,Stainless Dot Peen Marking Machine
Jinan Luyue CNC Equipment Co., Ltd. , https://www.sdlycnc.com