Gear Operated Ceramic Lined Floating Ball Valve (GQ341TC)

3 Pcs Gear Operated Ceramic Lined Floating Ball Valve (GQ341TC)
Characterics:
This valve is applicable as an on-off or pipelines with high-hardness grains or with both soft grains and corrosive media. Its nominal pressure is 1.6MPa, and applicable temperature below 200 Deg C.

All medium-contacting parts are made of structural ceramic, featuring extremely high chemical stability and hardness (Rockwell Hardness (HRC90), only next to diamond. Therefore, this valve has extremely strong resistance to abrasion, corrosion and erosion, good heat insulation and small thermal expansion. 

The ball body is made with advanced grinding equipment and process, with high-precision ball roundness and good surface quality, and after facing-up with the valve seat, a good sealability can be obtained by means of self-lubrication of Zr02 Ceramic.

Thanks to the ceramic's strong resistance to abrasion, this valve is durable and extremely reliable, with a long service life being 2-4 times of that of Ti alloy and Monel Valves.

Application Specification
1. Design and Manufacture: GB/T 12224
2. Face to Face Dimension: Manufacturer's Standard
3. Flange Dimension: JB/T 79.1, ANSI B16.5  DIN 2543, JIS B2020
4. Inspection and Test: GB/T 9092
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel

Materials for Main Parts 3 Pcs Gear Operated Ceramic Lined Floating Ball Valve (GQ341TC)
Characterics:
This valve is applicable as an on-off or pipelines with high-hardness grains or with both soft grains and corrosive media. Its nominal pressure is 1.6MPa, and applicable temperature below 200 Deg C.

All medium-contacting parts are made of structural ceramic, featuring extremely high chemical stability and hardness (Rockwell Hardness (HRC90), only next to diamond. Therefore, this valve has extremely strong resistance to abrasion, corrosion and erosion, good heat insulation and small thermal expansion. 

The ball body is made with advanced grinding equipment and process, with high-precision ball roundness and good surface quality, and after facing-up with the valve seat, a good sealability can be obtained by means of self-lubrication of Zr02 Ceramic.

Thanks to the ceramic's strong resistance to abrasion, this valve is durable and extremely reliable, with a long service life being 2-4 times of that of Ti alloy and Monel Valves.

Application Specification
1. Design and Manufacture: GB/T 12224
2. Face to Face Dimension: Manufacturer's Standard
3. Flange Dimension: JB/T 79.1, ANSI B16.5  DIN 2543, JIS B2020
4. Inspection and Test: GB/T 9092
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel

Materials for Main Parts

Chipping Hammers

A Chipping Hammer has a blade-type striking surface on one end and a spike point on the opposite end (see Figure 6). A chipping hammer is mainly used to remove slag from welds and to remove concrete from metal surfaces.

Figure 6: Chipping Hammers
Chipping hammer inspection is the same as for hammers in general. In addition, inspect the blade to ensure that it is sharp and not chipped or damaged.
When using a chipping hammer, the work must be properly secured. The chipping hammer is gripped like a normal hammer. The hammer is swung so that the blade strikes the work at a slight angle.

Chipping Hammer

Chipping Hammer,Handle Chipping Hammer,Welding Chipping Hammer,Welding Slag Hammer

Changzhou Edaweld Trading Company Limited , https://www.edaweld.com