Cheap Dirtbike Motorbikes Motorcycles 125cc-200cc (HD125Y-2)

    Model NO.: HD125Y-2
    Braking Mode: Front Disc Brake Drum
    Cooling Method: Air Cooling
    Condition: New
    Many Color Available: High Performance & Quality
    Trademark: Hodar
    Specification: CCC, CQC, EEC, EPA
    HS Code: 8711204000
    Model NO.: HD125Y-2
    Braking Mode: Front Disc Brake Drum
    Cooling Method: Air Cooling
    Condition: New
    Many Color Available: High Performance & Quality
    Trademark: Hodar
    Specification: CCC, CQC, EEC, EPA
    HS Code: 8711204000


    We make Motorcycles, Scooters,US Style Chopper, Bajaj Passenger Tricycles, Cargo trikes, electric bikes, electric scooter, Electric tricycles, ATV quad, spare parts etc 

    Overall Length(mm):                         2080mm                          
    Overall Width(mm):                          830mm
    Overall Height(mm):                         1240mm
    WheelBase(mm):                            1320mm
    Ground Clearance(mm):                       250mm
    Dry Weight(kg)                              95kg
    Max. Load Mass(kg):                         150kg
    Max. Speed(km/h):                           90km/h
    Tire:                                       Front: 2.75-21/200KPa          
    Rear:  4.10-18/225Kpa                                  
    Rim Type:                                   Spoke/Alloy                
    Driving Mode:                               By Chain
    Brake Mode:                                 Front: Disc         Rear: Drum or Disc               
    Brake Operation Mode:                       Front: By Hand      Rear: By Foot
    Engine:                                     156FMI        
    Engine Type:                                Single Cylinder     Four Stroke
    Cylinder Type:                              Vertical               
    Bore X Stroke(mm):                          Dia.56.5 X 49.5(mm)                               
    Piston Displacement:                        124cc   
    Compression Ratio:                          9.0:1  
    Max. Torque(N.M/rpm):                       8.2/7500(N.M/rpm) 
    Lubrication:                                Compress & Splash Combined Type 
    Max. Output Power(kw/rpm):                  8.5/9500(kw/rpm) 
    Ignition:                                   C.D.I
    Started System:                             Electric Starter/Kick Starter
     
    Engine Cooling:                             Air Cooling
    Transmission:                               Five Speed Gearshift
    Clutch:                                     Manual, Wet and Multi-Disc Type
    Battery:                                    12V7AH
    Fuel Capacity:                               13L
    Economical fuel consumption
    (l/100km):                                  1.6
    Break Performance:                          ≤7m/30km/h
    Max. Fork advancing angel (°):                23°
    Max. Voice (dB (A):                         82
    Shipping Size: (Front wheel, front fender and handlebar locked down)                       
    Packing Size(LxWxH)(mm):                  1690 X 460 X 870 mm
     
    Weight:                                  Net Weight: 95kgs        Gross Weight: 120kgs
    Quantity Of Container:                    
    20'FCL:                                    26 units
    40'FCL:                                    56 units
    40'HQ:                                    78 units


    We make Motorcycles, Scooters,US Style Chopper, Bajaj Passenger Tricycles, Cargo trikes, electric bikes, electric scooter, Electric tricycles, ATV quad, spare parts etc 

    Overall Length(mm):                         2080mm                          
    Overall Width(mm):                          830mm
    Overall Height(mm):                         1240mm
    WheelBase(mm):                            1320mm
    Ground Clearance(mm):                       250mm
    Dry Weight(kg)                              95kg
    Max. Load Mass(kg):                         150kg
    Max. Speed(km/h):                           90km/h
    Tire:                                       Front: 2.75-21/200KPa          
    Rear:  4.10-18/225Kpa                                  
    Rim Type:                                   Spoke/Alloy                
    Driving Mode:                               By Chain
    Brake Mode:                                 Front: Disc         Rear: Drum or Disc               
    Brake Operation Mode:                       Front: By Hand      Rear: By Foot
    Engine:                                     156FMI        
    Engine Type:                                Single Cylinder     Four Stroke
    Cylinder Type:                              Vertical               
    Bore X Stroke(mm):                          Dia.56.5 X 49.5(mm)                               
    Piston Displacement:                        124cc   
    Compression Ratio:                          9.0:1  
    Max. Torque(N.M/rpm):                       8.2/7500(N.M/rpm) 
    Lubrication:                                Compress & Splash Combined Type 
    Max. Output Power(kw/rpm):                  8.5/9500(kw/rpm) 
    Ignition:                                   C.D.I
    Started System:                             Electric Starter/Kick Starter
     
    Engine Cooling:                             Air Cooling
    Transmission:                               Five Speed Gearshift
    Clutch:                                     Manual, Wet and Multi-Disc Type
    Battery:                                    12V7AH
    Fuel Capacity:                               13L
    Economical fuel consumption
    (l/100km):                                  1.6
    Break Performance:                          ≤7m/30km/h
    Max. Fork advancing angel (°):                23°
    Max. Voice (dB (A):                         82
    Shipping Size: (Front wheel, front fender and handlebar locked down)                       
    Packing Size(LxWxH)(mm):                  1690 X 460 X 870 mm
     
    Weight:                                  Net Weight: 95kgs        Gross Weight: 120kgs
    Quantity Of Container:                    
    20'FCL:                                    26 units
    40'FCL:                                    56 units
    40'HQ:                                    78 units

    Motor End Cover, namely the motor casing. General divided into front cover and back cover, used to fix and support the motor shaft.
    Application: Popular speaking, it is to use the ends of the motor through a shaft fixed the machine.
    The material: Motor end cover is usually of metal, including aluminum, aluminum casting, cold steel, plastic, bakelite, etc. Usually choose different materials according to different machine type.Such as motor vehicle are mostly cold steel, large motor is the use of Die Casting technology.
    process: Generally, there are cold stamping, stretching, die-casting process, etc.
    Application area: The motor end cover is must accessories, use very extensive. Usually in the following content:  Automotive air conditioner, fan, warm air blower, the seat motor, wiper motor, blower, air conditioning fan, aadiator cooling fan, the cooling fan and the oil pump motor.

    Motor End Cover

    Motor End Cover,Aluminum Die Casting Motor Cover,Drive Motor Cover,Motor Starter End Cover

    NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.blcastings.com

    Previous Post: High Speed Centrifuge Hc-16A
    Next Post: AC Electric Gasoline Transfer Explosion Proof Pump Jyh-80f
    Home
    Recent Posts
    • Spark Plug Wire Thermal Boot Heat Protector
    • Full Automatic PVC Plastic Pipe Extrusion Mould …
    • DIN6923 Gr. 8 Flange Nut
    • Generally Double Twisted Barbed Wire Machine
    • Customized Injection Plastic Foot Pedal Bin Dust…
    • Mobile Phone Accessories Made by Powder Injectio…
    • Welded Flipper Delta Anchor for Ship
    • Screw and Barrel for Injection Molding Machine
    • Garden Wheel Barrow, Pb-Free and UV Resistance G…
    • Customized Agriculture Machine Bracket We Chrome…
    • Carbon Steel Zinc Plated M4 Pan Head Phillips Sh…
    • Good Mixing Single Screw and Barrel for Extruder…
    • Whole Membrane Bioreactor Equipment Waste Water …
    • MMA-200ds Series (standard type) Professional DC…
    • Cooling Enduro Chopper Motorbike Motorcycle 110c…
    • Cold Bending Roof Wall Angle Roll Forming Machin…
    • Bst-3850A Plastic Recycle Case Injection Molding…
    • Supermarket Pump, AC Pump, Condensate Pump, RS-2…
    • Self Clinching Non-Flush Studs Nuts
    • Folding Warehouse Trolley