The De-coiler
Coil Sheet Guiding and Adjusting Equipment
Film Covered Device
Main Roll Forming System
Post-Cutting Device
Hydraulic Station
PLC Control System
Support Table
Technical parameters of export standard roof roll forming machine:
1 Main motor power: 5.5KW
2 Hydraulic station power: 4KW
3 Hydraulic oil pump: CB-E310
4 Sprocket: P-25.4
5 Roller station: 16
6 Yield strength: 32MPa
7 Diameter of principal axis: 80MM (add a key between axle and roller to fix)
8 Material of roller: C45steel hard chrome plating
9 Processing speed: 8-15m/min(we can do 15m/min also, but we recommend 8m/min)
10 Thickness: 0.2-1.0mm
11 Installation dimension about(L*W*H): 9.2*1.5*1.4M
12 Total weight: About 6.6T
13 Equipment parts includes: Decoiler (capacity 8t), roll forming system, hydraulic system, PLC frequency conversion control system, the sensor of length, cutting system.
14 The temperature range of working line: -35— 50
|
Working Flow |
|||
|
Decoiler → front shear (require or not) → guiding unit → roll forming unit → rear shear → finished product supporter/ (stacking unit) |
|||
|
parameters |
|||
| No | Item | Description | |
| 1 | Raw material | Material type | Color coating steel |
| Thickness | 0.3-0.8 (mm) | ||
| Yield Strength | 230-300Mpa | ||
| Width | 1092(mm) | ||
| weight | 5(tons) | ||
| Coil OD | Φ1350mm | ||
| Coil ID | Φ508 mm/Φ610mm | ||
| 2 | decoiler | Expanding | Hydraulic |
| Releasing | Hydraulic | ||
| Speed control | Light control | ||
| power | // | ||
| 3 | Roll forming system | Guiding | 1 set |
| Filming device | // | ||
| Pre-cutting | Require or not | ||
| Lubricating device | // | ||
| Roll forming | 1 set | ||
| Post cutting | 1 set | ||
| No of roller station | About 20 | ||
| Roller material | No 45 steel | ||
| Forming speed | 30 (m/min) | ||
| Power | About 7.5 kw | ||
| 4 | Power source | AC380V,50Hz,3 Phase | |
| 5 | Total power (kw) | About 11 | |
| 6 | Machine dimension (L×W×H, m) | See layout | |
Ceramic nozzle holders
keramik3.jpg
Ceramic parts are a vital component of most CO2 machines cutting head when the nozzle holder and the sensor head is often made of ceramic to withstand large and rapid changes between different temperatures and is designed to act as an insulator for isolating the nozzle from the rest of the cutting head and thus create a magnetic field between the nozzle and sheet, this controls the Z axis and height adjustment to allow for uninterrupted height adjustments directly in production.
An uneven plate, in other words, no major obstacles during laser cutting.
Though ceramic is very much about Precitec, meaning if you have a Precitec cutting head and need a nozzle holder, chances are that it is a Precitec part. Even the leading machine manufacturers such as Trumpf and to some extent Bystronic, uses Precitec parts although they often appear to be their own.
Ceramic Laser Ring,White Ceramic Laser Ring,Black Ceramic Laser Ring
Changzhou Edaweld Trading Company Limited , https://www.edaweld.com