China Factory Price Industrial Fruit Dryer Machine

KINKAI Heat Pump Fruit Dryer Machine Introduction
KINKAI third generation heat pump fruit dryer machine is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator, circulating hot-air assures uniform drying and high efficiency.
 
Model:  JK03RD, JK06RD, JK12RD
Power Supply:  220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source + 25% electric power
Max. Temp:  75ºC
Working Temp:  -10~45ºC
Functions:  Heating / Cooling / Dehumidify
Dryer Type:  Batch Type
 
How Does It Work?
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final fruits will be dried by the hot air circulating in drying chamber

Technical Parameters of KINKAI Fruit Dryer Machine
 

Recommend Dryer+Drying Chamber SizesWarm prompt: We can make any drying chamber sizes as your required.

Features of KINKAI Fruit Dryer Machine
1, Energy saving and environment  protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise

2, Stable property and operating easily
Touch screen full automatic control
Different materials with different drying type, adopt PLC control, can setting different drying curve, suitable for drying different materials.

3, Second waste heat recovery technology(patent)
    Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.

4, Accurate control temperature and humidity
    According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10~75C.

5, Horizontal Blowing 360ºC
    By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so ensure a high drying efficiency and save energy, lead to a uniform drying.

6, It's batch operation, so can adjust process condition anytime. Thus can change product from time to time

7, Dry material in tray, easy for load and unload, not easy cause any damage for the raw material, clean conveniently.     
                 


Package and Delivery
For heat pump dryer parts---with plywood
For drying chamber +trolleys
  If shipped with 20ft container or 40ft container, no packing
  If shipped with LCL( less than container load), packed in plywood


Our Services

A. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need. 

B. After-sales service
1, Technical support for your installation, operation and maintenance. 
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.

Our Company






 

Spray Bottle

A spray bottle is a container that is designed to dispense a liquid in a form of a spray or mist. It is typically made from plastic or glass and consists of a nozzle that is attached to a tube connected to a liquid reservoir. When the mechanism on the nozzle is activated, typically by squeezing or pressing, it creates a vacuum that draws the liquid up the tube and out of the nozzle, creating a spray. Spray bottles are commonly used for products like cleaning solutions, Skin care solution ,perfumes, hair products, and more.

Plastic Spray Bottles,Clear Plastic Spray Bottles,Plastic Water Spray Bottle,Plastic Sprayers,electric water bottle,skin hydration meter,hydration monitor,aromatherapy diffuser

Kunshan Muchun Electric Co., LTD , https://www.muchunelectric.com