The more simple and easy to understand the product, the more attention it has to pay attention to. Many of the seemingly faulty issues are caused by the lack of regular maintenance of the temperature bath.
   For a constant-temperature circulating water tank factory, there will be a small amount of impurities in the water. The general temperature is set at 20 °C. It is particularly suitable for the growth and reproduction of microorganisms. After a long time, these microorganisms will clog the water filter to cause backwater. Poor, the pump will have a loud noise. The microorganisms attached to the surface of the heat exchanger cause the heat transfer effect of the heat exchanger to deteriorate and the cooling capacity to become smaller. In addition, the electric power of the water circulation of the water tank and the heat removed by the refrigerant from the load need to be excluded from the radiator at the front air hood. If the front air hood is filled with dust, cotton, etc. will hinder the dissipation of these heat for a long time, the cooling effect will be A substantial reduction, if not cleared, can easily lead to instrument burnout due to electric heat. When the relative humidity in the environment is too high, the relative humidity in the air is too high, and the water pump, the water pipe connector, and the external water pipe in the water circulation waterway are likely to be dew-condensed, and when they accumulate much, they will drop to the ground. Lowering the room temperature or dehumidifying can prevent dew.
Therefore, we must strictly follow the requirements in the manual and do regular maintenance work.
??
Platic PVC Pipe and Pipe Joint Injection Moulding Machines
Different design of machine struchture and PVC special material screw and barrel of the machines, to satisified customer's differenct size of PVC pipe and pipe joint.
The special design of hydraulic pressure oil-way system improved the power of electricmotor and oil pump reseasonbale. The enhanced injection contyrol oil way , it accelerated injection moment, increaswed pressure and improved injection rate by more than 170%.
Environmental conservation, the reasonable increase of motor oil pump power maximally reduced energy consumption.
Totally enclosed metal plate sheet enhanced overall saftely.
Machine has hydraulic safety and mechanical safetly.
Platic Pvc Pipe,Pipe Joint Injection Moulding Machines,Pvc Pipe ,Hdpe Pipe
Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyongmachinery.com