According to analysis, driven by the growth in consumer demand for specialty coatings, the global market for titanium dioxide will reach US$31.19 billion in 2022. Meanwhile, the consumer demand for cosmetics driven by the economic growth of the BRICS countries will also become a strong driving force for the growth of the titanium dioxide industry. one.
In 2014, the market value of titanium dioxide worldwide was approximately US$15.17 billion, of which the paint industry was the largest consumer sector. In 2014, the total consumption was approximately US$8 billion. Due to its excellent hiding power, titanium dioxide was mainly used for building interior wall coatings. Titanium Dioxide is also the preferred pigment for architectural coatings applications that require light retention and color retention, as well as self-cleaning and anti-aging properties. In the field of industrial coatings, due to opacity, outdoor aging resistance, and in acid-catalyzed coatings and coatings. In the field of curing and other unique properties, titanium dioxide has also been widely used.
Europe is the second largest consumer market for titanium dioxide in 2014, with a total value of more than US$4.3 billion. The growth of personal care markets in the United Kingdom, Germany, Italy and France will be the driving force for the future growth of titanium dioxide, especially for ultra-fine titanium dioxide. Continuous innovation will create new space for titanium dioxide in personal care and cosmetics applications.
From 2015 to 2022, the average annual growth rate of the consumption of titanium dioxide in the plastics industry is about 4.5%. The future demand for plastic doors and windows will have a positive impact on the consumption of titanium dioxide.
The CAGR of titanium dioxide consumption in the Asia-Pacific region from 2015 to 2022 is about 4%, while the market value of CAGR is expected to reach 10%. The main consumption areas are paint and paint, pulp and paper and other industries.
Precision Casting Of Food Machinery
Food machinery precision casting or food machinery investment casting, silica sol process. It is a casting process with little or no cutting.
Cast food machinery is an excellent process technology in the foundry industry. Its application is very extensive. Food machinery cast not only applies to the casting of various types and alloys, but also produces the dimensional accuracy of castings. The surface quality is higher than that of other casting methods, and even castings that are difficult to cast and which are difficult to cast have high temperature resistance and are not easily processed can be cast using investment casting.
In wax pattern process,we mix stearic acid and paraffin wax in wax pattern making,as you know,it is better than polyethylene,and the wax deformation is small.
In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at 24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.
In shell hardening process,we use aluminium chloride to harden the shell.This can make the shell so hard that it can`t be distorted,at the same time the bug which the casting may have will be decreased.If there are letters or numbers in it,they will be much clearer.
In dewaxing process,about 95% of the castings suppliers adopt the original water dewaxing technics,but we using the advanced steam dewaxing technics,which we are very proud of. This can effectively avoid the air-hole and sand-hole, making the casting look much nicer.
In smelt process, we use middle frequency furnace, avoiding the emergence of the oxide; in molten steel control part, we use Germany-imported direct reading spectrometer machine, assuring its quality before the molten steel out of the furnace. During this process we use ERP production and management software to get the feedback information.
In shell-knock out process, we have special machines,which can decrease the hitting and knocking, easily made by manual shell knocking out.
In shot-blasting process, we have crawler-type and hanging shot-blasting machine, with steel shot 0.5-0.8, making the products smooth.Of course, if the customer wants it look much nicer, we also can carry out sand-blast treatment.
In heat treatment process, we use electric furnace, and adopt double-temperature control in order to heat the products equally. As a result, the products will have great metallurgical structure.
Our tolerance can reach at the grade of 5-7 according to our country`s tolerance standard.
In machining process,we have 12 CNC machining centers and some other machines, so we can make further machining if the customers need.
Precision Casting Of Food Machinery,Investment Casts for Food Machinery,Food Machinery Investment Casts,Steel Casting for Food Machinery
Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com