The light incubator is a high-precision thermostat with light function, which can be used as germination, seeding, tissue cells and microorganism cultivation of plants; feeding of insects and small animals; BOD measurement of water analysis and constant temperature test for other purposes. At the same time, light incubators are widely used in biological, genetic engineering, medicine, agriculture, forestry, environmental science, animal husbandry, fisheries and other production and research departments.
The control system of the old light incubator adopts an analog circuit. The temperature drift and the parameter error of the components have a great influence on the setting of the temperature and the control accuracy. The temperature gradient and the change of the illuminance cannot be automatically completed. It needs to be manually reset and the use is very low. Convenience. The Top Instrument designed a new GTOP series of light incubator control system. The light box system adopts single-chip microcomputer and digital quantity control, which not only eliminates the effects of temperature drift and component parameter errors, but also realizes the automatic change of temperature gradient and illuminance, friendly man-machine interface for counting, and simple operation.
The light box is quite outstanding in appearance design: luxurious aluminum alloy frame, gold or silver, never aging deformation, never rust, exquisite appearance, with a lock outside the box to ensure the safety of internal samples; light box external standard opening ( The fan blade) makes the temperature control more accurate, the bottom has a universal wheel, and it is convenient to move; the space of the internal grid space of the box can be adjusted according to the height of the sample, and it is more convenient and practical; the ventilation of the air duct type, the studio wind speed is soft, and the temperature is even; The use of hollow reflective tempered glass, good thermal insulation performance, elegant appearance.
With the rapid development of science and technology, the use of plastics in modern medicine is steadily increasing. Medical devices made from injection-molded plastics help reduce health care costs, infectious diseases and pain management. High-tech polymers are used in medical device prototyping and are often used to create improved prosthetics and devices to reduce the risk of infection. Medical plastic injection molding directly improves patient safety and the ability to save more lives. High-gloss injection molding: the basic process of high-gloss injection molding is to rapidly heat the surface of the mold with high temperature and high pressure steam before injection molding, so that the surface temperature of the molding mold cavity reaches above the glass transfer temperature (TG) of the resin plastic, and then inject the plasticized plastic melt into the closed mold cavity. During the injection phase, the mold temperature is kept constant by high temperature and high pressure steam. After injection molding, stop the air supply, blow out the steam in the tube with the air pressure of the duct, and then inject cooling water to make the mold temperature drop rapidly, until the mold is cooled and opened to take out the product.
Custom Plastic Parts,Custom High Precision Plastic Injection Molding,Precision Plastic Injection Molding Accessories,Plastic Injection Molding Tooling Parts
Suzhou Dongye Precision Molding Co.,Ltd. , http://www.dongyeinjectionmolding.com