Model NO.: ACE65/132-80/156
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Cavity: Single Cavity
Extruder Gearbox: High Torque Vertical Type
Gearbox Bearing: NSK, SKF
Motor Brand: Weg, Siemens
Extruder Model: Ace65/132-80/156
Extrusin Speed: 1.0-2.0m/Min
Barrel & Screw: Bimetallic Barrel & Screw
Controller: Siemens PLC
Trademark: ACEEXTECH
Transport Package: Wood Pallet and Film Covered
Specification: 1130mm PVC corrugated roof sheet extrusion line
Origin: China
HS Code: 8477800000
Model NO.: ACE65/132-80/156
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Cavity: Single Cavity
Extruder Gearbox: High Torque Vertical Type
Gearbox Bearing: NSK, SKF
Motor Brand: Weg, Siemens
Extruder Model: Ace65/132-80/156
Extrusin Speed: 1.0-2.0m/Min
Barrel & Screw: Bimetallic Barrel & Screw
Controller: Siemens PLC
Trademark: ACEEXTECH
Transport Package: Wood Pallet and Film Covered
Specification: 1130mm PVC corrugated roof sheet extrusion line
Origin: China
HS Code: 8477800000
PVC trapezoid roofing tile extruderFor production of customizes different solutions according to clients'Â demands on product structure, shape which has width from
720mm to 1130mm and thickness from 0.8mm to 3.0mm with round wave type and trapezoidal shape, also possible for multi-layers design.
Advantages:
♦ Specified screw design for better material plasticizing &mixing effect, For high filling formula, bimetallic screw and barrel can guaranteeÂ
   perfect solution;
   perfect solution;
♦ Co-extruder equipped with dehumidifying and drying system can be applied to produce PMMA/ASA composite material, which ensures the
   good performance and high quality of final product;
   good performance and high quality of final product;
♦ T-die adopted hanger style can be applied to produce single PVC melt material or multi-layer compound material, and flow surface adopts
   polish and electroplated treatment;
   polish and electroplated treatment;
♦ Specified design of Calibrator ensuring faster heating transfer and quickly cooling calibration;
♦ Guillotine cutter ensuing flat and chip free cutting, and tracking cutter especially for thick and high filler product;
♦ Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently
Work flow and detailed information:
| Feeder | • To feed material into extruder; |
| Extruder | • World famous brand electrical component such as    Siemens,Schneider, ABB etc; • High torque gearbox with adopts NSK/SKF bearing; • Siemens/WEG original motor achieved global after service; • Bimetallic screw and barrel; • Intelligent PLC controlling system with human-friendly interface. |
| Co-extruder | • World famous brand electrical component such as Siemens,Schneider, ABB etc; • High torque gearbox with adopts NSK/SKF bearing; • Siemens/WEG original motor achieved global after service; • Intelligent PLC controlling system with human-friendly interface. |
| Flat die and feed block | • Coat hanger type • 5CrNiMo steel and P20 material • Apply to single lay and muti layer with top layer adopts PMMA/ASA co-extrusion • Support trolley is include |
| Calibration table | • Specified design of Calibrator ensuring faster heating transfer and quickly cooling calibration • Guillotine cutter ensuing flat and chip free cutting • Tracking cutter especially for thick and high filler product • Haul off machine with adopts wear-resisting rubber roller • Speed driving by frequency inverter |
| Ridge tile calibrator | • Pneumatic driving • High quality cast aluminum material • Double station heating oven is include |
| Stacker | • Stainless steel304 as touching material |
Main elements brand:
♦ Motor: Siemens, WEG, SEW
♦ Gear reducer: SEW, FALK
♦ Bearing: SKF, FAG, NSK
♦ Air cylinder: Festo, SMC, AirTac
♦ PLC interface and module: Siemens, Schneider, Beckhoff
♦ Frequency inverter: ABB, Schneider, Siemens
♦ Servo motor: Lenze, Delta
♦ Pressure sensor: Dynisco, Gefran
♦ Low voltage component: Siemens, Schneider, Omron, LS
♦ Temperature controller: Omron, RKC
♦ Solid state relay: Crydom, Celduc
Â
Â
Technical Parameter:
| Structure | Â Â Â Â Â Â Â Â Â Â Â Material | Â Â Â Â Â Â Â Â Â Â Â Width | Thickness | Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Extruder Model | Designed Output |
| Single layer | PVC | 720/920/1100/1130mm | 1.0-3.0mm | ACE80/156 | 350-400kg/h |
| Double layers | ASA/PMMA+PVC | 720/920/1100/1130mm | 1.0-3.0mm | ASS50/30+ACE80/156 | 350-400kg/h |
| Triple layers | ASA/PMMA+PVC+PVC | 720/920/1100/1130mm | 2.0-3.0mm | ASS50/30+ACE65/132+ACE51/105 | 350-400kg/h |
| Triple layers | PVC+PVC foamed+PVC | 720/920/1100/1130mm | 2.0-3.0mm | ACE51/105+ACE65/132+ACE51/105 | 350-400kg/h |
| Four layers | ASA/PMMA+PVC+PVC foamed+PVC | 720/920/1100/1130mm | 2.0-3.0mm | ASS50/30+ACE51/105+ACE65/132+ACE51/105 | 350-400kg/h |
Our service:
Ability to provide the customized plastic extrusion solutions;
Turn-key solution is pleased to be provided include plant layout and design, formula, production support etc;
Complete sales system covering the pre-sales, sales and after service jobs;
Professional sales team with local language speaking ability for English, Portuguese, Spanish, Turkish and Russian markets;
Commissioning &Â installation service in customer plant and free training to client labors.
In order to provide you the specific proposal, please advise:
Contact to ACEEXTECH:Â
JIANGSU ACEEXTECH MACHINERY CO., LTD
Tel:+86-512 58620105
Fax:+86-512 58620107Â Â Â
Mobile : +86 18021237973
Website:www.aceextech.comÂ
Add:No.18 Yuefeng Road, Nanfeng Town, Zhangjiagang City Jiangsu, China, 215600
Â
PVC trapezoid roofing tile extruderIn order to provide you the specific proposal, please advise:
Basic drawing of final product request to be provided;
Output capacity will be need;
Single or co-extrusion?
How many layers will be?
Contact to ACEEXTECH:Â
JIANGSU ACEEXTECH MACHINERY CO., LTD
Tel:+86-512 58620105
Fax:+86-512 58620107Â Â Â
Mobile : +86 18021237973
Website:www.aceextech.comÂ
Add:No.18 Yuefeng Road, Nanfeng Town, Zhangjiagang City Jiangsu, China, 215600
Â
For production of customizes different solutions according to clients'Â demands on product structure, shape which has width from
720mm to 1130mm and thickness from 0.8mm to 3.0mm with round wave type and trapezoidal shape, also possible for multi-layers design.
Advantages:
♦ Specified screw design for better material plasticizing &mixing effect, For high filling formula, bimetallic screw and barrel can guaranteeÂ
   perfect solution;
   perfect solution;
♦ Co-extruder equipped with dehumidifying and drying system can be applied to produce PMMA/ASA composite material, which ensures the
   good performance and high quality of final product;
   good performance and high quality of final product;
♦ T-die adopted hanger style can be applied to produce single PVC melt material or multi-layer compound material, and flow surface adopts
   polish and electroplated treatment;
   polish and electroplated treatment;
♦ Specified design of Calibrator ensuring faster heating transfer and quickly cooling calibration;
♦ Guillotine cutter ensuing flat and chip free cutting, and tracking cutter especially for thick and high filler product;
♦ Intelligent PLC controlling system with human-friendly interface make the operation easily and convenientlyWork flow and detailed information:
| Feeder | • To feed material into extruder; |
| Extruder | • World famous brand electrical component such as    Siemens,Schneider, ABB etc; • High torque gearbox with adopts NSK/SKF bearing; • Siemens/WEG original motor achieved global after service; • Bimetallic screw and barrel; • Intelligent PLC controlling system with human-friendly interface. |
| Co-extruder | • World famous brand electrical component such as Siemens,Schneider, ABB etc; • High torque gearbox with adopts NSK/SKF bearing; • Siemens/WEG original motor achieved global after service; • Intelligent PLC controlling system with human-friendly interface. |
| Flat die and feed block | • Coat hanger type • 5CrNiMo steel and P20 material • Apply to single lay and muti layer with top layer adopts PMMA/ASA co-extrusion • Support trolley is include |
| Calibration table | • Specified design of Calibrator ensuring faster heating transfer and quickly cooling calibration • Guillotine cutter ensuing flat and chip free cutting • Tracking cutter especially for thick and high filler product • Haul off machine with adopts wear-resisting rubber roller • Speed driving by frequency inverter |
| Ridge tile calibrator | • Pneumatic driving • High quality cast aluminum material • Double station heating oven is include |
| Stacker | • Stainless steel304 as touching material |
Main elements brand:
♦ Motor: Siemens, WEG, SEW
♦ Gear reducer: SEW, FALK
♦ Bearing: SKF, FAG, NSK
♦ Air cylinder: Festo, SMC, AirTac
♦ PLC interface and module: Siemens, Schneider, Beckhoff
♦ Frequency inverter: ABB, Schneider, Siemens
♦ Servo motor: Lenze, Delta
♦ Pressure sensor: Dynisco, Gefran
♦ Low voltage component: Siemens, Schneider, Omron, LS
♦ Temperature controller: Omron, RKC
♦ Solid state relay: Crydom, Celduc
Â
Â
Technical Parameter:
| Structure | Â Â Â Â Â Â Â Â Â Â Â Material | Â Â Â Â Â Â Â Â Â Â Â Width | Thickness | Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Extruder Model | Designed Output |
| Single layer | PVC | 720/920/1100/1130mm | 1.0-3.0mm | ACE80/156 | 350-400kg/h |
| Double layers | ASA/PMMA+PVC | 720/920/1100/1130mm | 1.0-3.0mm | ASS50/30+ACE80/156 | 350-400kg/h |
| Triple layers | ASA/PMMA+PVC+PVC | 720/920/1100/1130mm | 2.0-3.0mm | ASS50/30+ACE65/132+ACE51/105 | 350-400kg/h |
| Triple layers | PVC+PVC foamed+PVC | 720/920/1100/1130mm | 2.0-3.0mm | ACE51/105+ACE65/132+ACE51/105 | 350-400kg/h |
| Four layers | ASA/PMMA+PVC+PVC foamed+PVC | 720/920/1100/1130mm | 2.0-3.0mm | ASS50/30+ACE51/105+ACE65/132+ACE51/105 | 350-400kg/h |
Our service:
Ability to provide the customized plastic extrusion solutions;
Turn-key solution is pleased to be provided include plant layout and design, formula, production support etc;
Complete sales system covering the pre-sales, sales and after service jobs;
Professional sales team with local language speaking ability for English, Portuguese, Spanish, Turkish and Russian markets;
Commissioning &Â installation service in customer plant and free training to client labors.
In order to provide you the specific proposal, please advise:
Contact to ACEEXTECH:Â
JIANGSU ACEEXTECH MACHINERY CO., LTD
Tel:+86-512 58620105
Fax:+86-512 58620107Â Â Â
Mobile : +86 18021237973
Website:www.aceextech.comÂ
Add:No.18 Yuefeng Road, Nanfeng Town, Zhangjiagang City Jiangsu, China, 215600
Â
In order to provide you the specific proposal, please advise:
Basic drawing of final product request to be provided;
Output capacity will be need;
Single or co-extrusion?
How many layers will be?
Contact to ACEEXTECH:Â
JIANGSU ACEEXTECH MACHINERY CO., LTD
Tel:+86-512 58620105
Fax:+86-512 58620107Â Â Â
Mobile : +86 18021237973
Website:www.aceextech.comÂ
Add:No.18 Yuefeng Road, Nanfeng Town, Zhangjiagang City Jiangsu, China, 215600
Â
Hydraulic metal machine is mainly applicable to steel mills, recycling and processing industries and non-ferrous metal smelting industries. Hydraulic Baling Machine can squeeze all kinds of metal scrap (steel shaving, waste steel, waste aluminum, waste copper, waste stainless steel and scrap automobile waste, etc.) into cuboid, octagon, cylinder and other shapes of qualified charge, which can reduce the transportation and smelting cost, and improve the speed of furnace. It is mainly used for cold pressing under normal conditions for scrap metal scraps, scrap steel scraps, waste oil tank, disassembling car shell and other metal scraps with a thickness of less than 3mm. Cold pressed into blocks for easy storage and transportation or furnace.
Features:
1) Hydraulic drive, smooth and noiseless work, fast extrusion speed, large extrusion force, compact package block, not easy to be scattered.
2) high quality national standard steel plate with advanced welding technology to make the mechanical parts strong and durable, low failure rate, long service life.
3) the oil cylinder seal is imported glyd ring, good sealing performance, strong pressure resistance.
4) Convenient installation, small floor space, no foundation, foot, etc. Simple operation, detachable and PLC automatic mode.
5) Cold extrusion will not change the metal material and increase the utilization rate.
Metal Shavings Baler, Scrap Metal Baler, Waste Metal Baler, Sheet Metal Baler, Metal Scraps Baler
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecometalsrecycle.com