Most mineral processing kiln production lines are often used in one kind of processing equipment, the dressing process, a rotary kiln roasting magnetic iron grade ore, the ore is changed to the original weak magnetic ferromagnetic facilitate magnetic separation. According to the use of rotary kiln, several problems caused by the rotary kiln in the beneficiation production line are summarized.
First, pitting and peeling off. The belt is often supported by the roller, and the contact between the roller and the belt is to generate a large Hertzian stress. This stress is a local high stress, and the wheel will generate fatigue under the long-term action of the pulsating stress. Pitting corrosion, after the pitting is enlarged, will cause large-scale peeling. For example, the peeling area of ​​Xiangfan Xinsanli Cement Co., Ltd. is as large as 360×1200mm2.
Then peel off and crush. The material of the wheel belt is generally carbon cast steel or 35SiMn, 42CrMnSi and other materials. Due to the defects of casting, the axial hardness of the wheel belt is uneven and the structure is inconsistent. Under high load, the structure of the wheel material is loose, and the place with low hardness has crushing, curling and compression. In addition, due to casting defects, subcutaneous voids, large areas of looseness, blisters, etc., can also cause spalling and indentation.
Finally broken. The radial or axial fracture of the wheel belt is completely broken in the radial direction, the inner arc changes, the field is difficult to repair, the axial crack is not completely cracked, and the method can be repaired.
Raw material is hot-rolled round steel, which is forged by air hammer and heat-treated to become a high-quality Grinding Ball. The Forged Steel Ball has high volume hardness, compact structure, fine grain and good wear resistance. Due to the stable quality of the raw materials, the impact toughness is as high as 12-15 J/cm2, and the breaking rate is less than 1%. Especially the large-diameter Steel Ball has the advantage that the cast steel ball cannot be achieved in the SAG mill.
Grinding Ball,Grinding Media Steel Ball,Forged Grinding Ball,Forgeing Grinding Ball
Jinan Zhongwei Casting And Forging Grinding Ball Co.,Ltd , https://www.cngrindingballs.com