Double curved wave bed shaker

The shaker is a patented new product of Pinggui Machinery Factory, which was put into production in the late 1980s and has obvious advantages.
Wherein hyperbolic ridges of the table is increased by two stripes region (below), a single straight bar into two-bed flat swash two hyperbolic contoured for ferrous metals, ferrous, rare and precious metal ores The selection of 0.019~3mm grain size, when the slurry is fed, the inclined strip section forces the ore particles to move in the longitudinal direction, against the oblique water flow caused by the complex strip, so that the light and heavy mineral particles crawl speed difference and off-angle The difference is increased; while the parallel strips make the concentrate strip thin and uniform and discharge in time, improving the sorting conditions, which can significantly improve the treatment capacity and beneficiation recovery rate under the control of certain sorting indicators. It is fully suitable for rough selection and selection of metal concentrators.
The shaker uses an eccentric link bed.
Figure

Chromium Carbide Overlay Vertical Mill Wear Parts

During the use of the vertical grinding roller body and the wear-resistant table lining, the rolling pressure of the roller, the supporting force of the material, and the frictional resistance between the material and the grinding roller lining will increase the severe abrasion between the body and the lining, the liner will crack or even break. Our company adopts chromium carbide bimetallic composite material to carry out hard surface wear-resistant overlay welding on the surface of the roller body, or repair the surface of the tires that have been worn, to solve the problem satisfactorily.

CCO Grinding Liner,Overlay Vertical Mill Wear Parts,Wear Resistant Grinding Liner,Hardfacing Overlay Ginding Lining

SHENYANG HARD WELDING SURFACE ENGINEERING CO.,LTD , https://www.hardfacingplate.com