Limestone LITHIUM HYDROXIDE plant design (design of lithium hydrate shop by calcite process) or spodumene lepidolite concentrates as raw limestone to produce single method for Lithium hydroxide monohydrate smelter car asked design. The process consists of fine grinding, baking, leaching, evaporation, crystallization, refining, drying, packaging and mother liquor processing. The process flow is shown in the figure.
Generally, the spodumene concentrate contains Li2O≥6%; the lithium mica concentrate contains Li2O4.3%~4.8%; the auxiliary material limestone contains CaO≥54% and SiO2≤1%. The concentrate is wet-milled by the ingredients to prepare a slurry with a fineness of less than 0.074 mm and a water content of 34% to 36%. After being formulated in the slurry tank, a qualified raw slurry containing 40% to 42% of CaO is obtained, and the raw slurry is 1150. The mature material is calcined by the rotary kiln at a temperature of ~1250 ° C, and the clinker is wet-ground to a thickness of less than 0.074 mm by a liquid-solid ratio of 3:1 and a leaching at a temperature of 95 ° C for 3 hours. The leaching slurry filter slag is washed by water in the reverse direction at 95 ° C for three times and then sent to the slag yard for storage. The leaching solution is precipitated, concentrated by evaporation to LiOH containing 130 g/L and filtered, and then cooled at 40 ° C for crystallization. The crude lithium hydroxide monohydrate obtained is separated, re-dissolved with pure water and concentrated, crystallized or washed with lithium hydroxide saturated solution to remove potassium and sodium impurities, and the separated lithium hydroxide monohydrate is vacuum dried at 130-140 temperature. For the product. Extracting lithium as a paper mill for the final mother liquor with caustic soda; lepidolite to a final mother liquor as a raw material may further recovery of lithium, potassium, rubidium and cesium compounds and other elements.
Equipment selection The main equipment includes ball mill , batching tank, rotary kiln, filter, evaporator, crystallization tank and dryer. Calcined using a rotary kiln, feeding the wet, heavy oil or directly heated by coal powder, unit capacity: by clinker is 10 ~ 12kg / (m2 • h ) or 32 ~ 38kg / (m3 • h ), can also be used the empirical Formula calculation. G=0.552D2.88 where G is the kiln capacity, t/h; D is the kiln inner diameter, m. The evaporator for concentrating the leachate is heated by natural circulation, two-effect or three-effect, and its production capacity is 15-20 kg/(m2•h) according to the amount of evaporated water.
According to the characteristics of the process, the fire separation method (raw material to calcined mature material) and wet method (cure slurry to product) should be divided into two parts. In order to reduce energy consumption, facilitate operation and reduce mechanical losses, the rotary kiln kiln and product processes are placed on the upper floors.
Technical features Concentrate machines and rotary kiln must be operated continuously in production, requiring reliable power supply and water supply. The vacuum evaporation process has a large amount of steam condensation. The cooling water is generally recycled; the lithium slag produced per ton of product is contained. The amount of alkaline water is 7 to 13 tons. When stacking, it is necessary to prevent the alkali solution in the slag from contaminating the soil and water.
The main technical and economic indicators for the production of lithium hydroxide monolithic lithium hydroxide production specifications are: Product quality LiOH not less than /% 56.5 CO2 is not greater than /%0.35 Cl - not greater than /% 0.003 SO4–– no greater than /%0.01 Na Not more than /%0.002 CaO Not more than /% 0.02 Acid insoluble matter (in HCl) Not more than /% 0.002 Total recovery of spodumene concentrate as raw material /% 78～80 Unit consumption (1t product) Spodumene Concentrate (Li2O 6%) /t 6.85～7.12 Limestone (CaO54%)/t 19～21 Water/t 200～300 Electricity/kW•h 6000～6500 Steam/t 70～80 Lithium mica concentrate Total recovery rate/% 62～65 Unit consumption (1t product) Lithium mica concentrate (Li2O4.5%)/t 12.6～12 Limestone (CaO54%)/t 36～38 Water/t 300～350 Electricity/kW •h 8000～8500 steam/t110～120
Cold spray Road Line Marking Machine is widely used in roads, bridges, railways, factories, coal mines, car parks, city markets and airport run inside. In the flat ground to draw different constraints and warnings and other rules to limit the signs of the road construction machinery.
The Cold spray road Line Marking Machine has played an important role in urban planning and highway construction with the advantages of speed, accuracy and efficiency. The greatest savings in the construction period of the road construction and economic investment. It consists of the following parts:
1. Piston pump body: the use of all-oil intrusion type of oil, hydraulic power, reduce wear and tear, the service life of up to 40,000 hours or more.
2. Seal: the United States imported raw materials carefully designed from casting, ultra-wear-resistant, whether winter or summer, can be used freely, Naisuan Jian, fatigue. Replacement is simple and convenient.
3. Suction pipe network: vertical body, suction tube easy to clean care, one can move independently, easy construction and operation. Stainless steel processing anti-corrosion, the wall does not fall off is not blocked. Suction filter to solve the liquid into the small, easy to plug the problem, increase the liquid into the area, narrow space, built-in increased filter.
4. Body: into the liquid valve and the outlet valve with ball-type ceramic beads super wear-resistant, than the traditional ball more than a few times the life span, no face, not broken sitting.
5. Frame: the use of vertical design compact and practical, removable, the frame can easily winding 30 meters high pressure hose, the overall equipment easy to care.
Main scope: Concrete Grinding machines, Floor Polishing Machines, Road Line Marking Machines, Truck Cranes, Road Rollers, excavators, Concrete Leveling Machines, Power Trowels and other Construction machinery .
Jining oking tec co.,ltd, established in 2010, is a professional manufacturer engaged in the research, development, production, sale and service of Concrete Grinding machines, Floor Polishing Machines, Road Line Marking Machines, Truck Cranes, Road Rollers, Excavators , Concrete Leveling Machines, Power Trowels and other Construction machinery .
We are located in Jining city,Shandong province with convenient transportation access. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction.
In recent years, we have introduced a number of advanced production equipment, and also have an excellent production team and a complete quality assurance system to ensure that each batch of goods is delivered to customers in a timely and high quality.
We also have an excellent management team, experienced technical staffs and professional sales team to solve all problems you encountered before and after sales. In addition, we have obtained I S O 9 0 0 1:2 0 1 5 certificates. Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as United States, Europe,Australia, Southeast Asia,Russia,the Middle East,Africa. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.
Cold Paint Road Line Marking Machine
Cold Paint Road Line Marking Machine,Cold Paint Road Marking Machine,Cold Spraying Road Marking Machine,Road Painting Machine
Jining Oking Tec Co., Ltd. , https://www.diggerexcavator.com